- PCD Tools For Wood
- Replaceable Insert Router Bits
- CNC End Mill
- Cutter Head
- Woodworking Tools
- Industries Knives
- Carbide Burr
- Carbide Rotary Burr
- Tungsten Carbide Burr Bits
- Tungsten Carbide Burr Set
- Cylindrical Carbide Burr
- Long Shank Carbide Burr
- Double Cut Carbide Burr
- Flame Carbide Burr
- Cone Carbide Burr
- Burr Blanks
- Carbide Rods
- Tire Reamer Bit
- Tungsten Carbide End Mill
- Carbide Tire Studs
- Snow Tire Studs
- ATV Tire Studs
- Motorcycle Tire Studs
- Mining & Oiling
TiAlN Coated Carbide Rotary Burr, 3 x 6 mm (3X Life)
TiAlN-coated carbide burr, 3 mm head on 6 mm shank, in standard, double and aluminum cuts; coating triples service life.
Design and Construction
A 3 mm tungsten carbide head on a 6 mm shank, vacuum-coated with TiAlN (titanium aluminium nitride). The coating raises surface hardness and heat resistance, and in side-by-side testing lasts about three times longer than an uncoated burr of the same geometry.
How It Works
Run at 6,000-50,000 RPM; the coated surface resists welding of chips to the flutes, keeping the cut consistent over long runs.
Applications
Precision deburring and finishing in metal fabrication, tool and die maintenance, and robotic or machine-mounted finishing where tool life matters.
Suitable Materials
Steel, stainless steel, cast iron; aluminum cut for non-ferrous work.
Field Cases
- Robotic finishing cell: TiAlN heads tripled the interval between tool changes on 304 weld dressing.
- Die shop: dry-grinding hardened cores at high RPM – the oxide film keeps heat in the chip, not the edge.
- Maintenance: coated and uncoated versions of the same 3 mm head run side by side; the coated one keeps its bite visibly longer.
Performance Data
| Metric | Value / Observation |
|---|---|
| Life multiplier | Coated carbide tools typically last 2-10x longer than uncoated in comparable tests (coating-industry data) |
| Coating thickness | 2-4 µm PVD layer – geometry unchanged |
| Stainless note | Lower friction reduces chip welding on 304/316 |
| Substrate | YG-series carbide below the coating does the structural work |
Material Comparison: Coating Comparison: TiAlN vs. TiN vs. Uncoated
Published coating data from tool-coating makers (Guhring, Schleiftechnik and peers):
| Property | TiAlN (this burr) | TiN | Uncoated |
|---|---|---|---|
| Microhardness | About 3,300 HV | About 2,300 HV | 1,300-1,500 HV (substrate) |
| Max working temperature | 800-900 °C | 550-600 °C | Substrate-bound |
| Friction coefficient | 0.3-0.4 | 0.4-0.65 | Carbide on steel |
| High-speed behaviour | Forms an aluminium-oxide film that reflects heat into the chip | Stable to mid speeds | Edge heat goes into the burr |
| Best zone | Dry high-speed work, sticky stainless | General steel work, cost-driven | Soft non-ferrous with Aluma cut |
Delivery Scope
Burr in plastic case; standard, double and aluminum cuts available from stock. Custom quantities accepted.
Why Choose VPOINT
VPOINT TOOLS has manufactured precision cutting tools since 2008 in two production bases (Sichuan and Dongguan, China) under ISO 9001 quality management. Every carbide burr is supported by a one-year warranty, custom and non-standard engraving service, and regrinding service. TiAlN coating is applied in-house, so coated and uncoated versions of the same geometry can be supplied together.
Precision & Quality Control
Each burr is checked for flute geometry, cutting-edge sharpness, shank runout and concentricity at micrometre level before packing; production batches are traceable and packed per ISO 9001 procedures.
Specifications
Standard specifications:
| Item | Specification |
|---|---|
| Head diameter | 3 mm |
| Shank | 6 mm (1/4″) |
| Coating | TiAlN |
| Cut types | Standard / Double / Aluminum (Aluma) |
| Grade | Tungsten carbide, YG series |
| Service life | About 3X uncoated (typical test data) |
Frequently Asked Questions
Is the burr made of solid tungsten carbide?
Yes. The cutting head is tungsten carbide with a TiAlN coating.
Which shank sizes are available?
6 mm (1/4″) shank.
What speed should I run the burr at?
Run between 6,000 and 50,000 RPM depending on the cutter diameter; use the lower end for larger diameters and the higher end for fine detail work.
Which materials can I machine with it?
Steel, stainless steel, cast iron; use the aluminum cut for non-ferrous material.
Do you accept custom or non-standard sizes?
Yes. VPOINT supports custom shapes, sizes, shank lengths and laser marking on non-standard orders (minimum order quantity applies).
Related Search Terms
TiAlN coated carbide burr, 3x6mm carbide burr, coated rotary burr 3x life, aluma cut coated burr, tialn vs tin burr, long life carbide burr, weld dressing rotary burr, fabrication deburring tool, steel shaping burr, metal carving bits, maintenance rotary files, grinder attachment burrs, cnc deburring tool, machine shop burrs, industrial carbide burrs, tool steel grinding
