- PCD Tools For Wood
- Replaceable Insert Router Bits
- CNC End Mill
- Cutter Head
- Woodworking Tools
- Industries Knives
- Carbide Burr
- Carbide Rotary Burr
- Tungsten Carbide Burr Bits
- Tungsten Carbide Burr Set
- Cylindrical Carbide Burr
- Long Shank Carbide Burr
- Double Cut Carbide Burr
- Flame Carbide Burr
- Cone Carbide Burr
- Burr Blanks
- Carbide Rods
- Tire Reamer Bit
- Tungsten Carbide End Mill
- Carbide Tire Studs
- Snow Tire Studs
- ATV Tire Studs
- Motorcycle Tire Studs
- Mining & Oiling
Single Spiral Flute Upcut End Mill
The single spiral flute upcut end mill cuts with one flute that lifts chips up and out of the groove. Chips leave the cut instead of grinding around at the bottom, so groove bottoms come out clean and the tool runs cooler. The cutting edge is ground from solid tungsten carbide into a single spiral flute: one edge can be ground sharper than many, and the wall finish shows it. Shanks from 3.175 to 8 mm, cutting diameters from 3 to 8 mm, cutting lengths from 8 to 52 mm, overall lengths from 38 to 85 mm.
The VPOINT Single Spiral Flute Upcut End Mill is a solid carbide end mill for CNC routers and machining centres. Built for CNC routers and machining centres in daily production.
VPOINT Single Spiral Flute Upcut End Mills are manufactured in Sichuan and Dongguan, China, with a single spiral flute that pulls chips upward for clean groove bottoms, suited to CNC cutting of wood, plastics, acrylic and aluminum where efficient chip evacuation matters.
Overview of VPOINT Single Spiral Flute Upcut End Mills
The single spiral flute upcut end mill cuts with one flute that lifts chips up and out of the groove. Chips leave the cut instead of grinding around at the bottom, so groove bottoms come out clean and the tool runs cooler. The cutting edge is ground from solid tungsten carbide into a single spiral flute: one edge can be ground sharper than many, and the wall finish shows it. Shanks from 3.175 to 8 mm, cutting diameters from 3 to 8 mm, cutting lengths from 8 to 52 mm, overall lengths from 38 to 85 mm.
- A Single Spiral Flute Upcut End Mill is a specialized cutting tool designed for use in CNC machines, particularly when cutting soft materials like wood, plastics, or aluminum. It features a single cutting edge or flute that spirals upward along the length of the tool.
- Model: One flute end mill
- Made of: Solid Tungsten Carbide
- Flutes: One Flutes
- Coating: No
- Shank Diameter: 3.175/4/5/6/8mm
- Cutting Diameter: 3-8mm
- Cutting Length: 8-52mm
- Overall Length: 38-85mm
- Features:
-
Single flute, large chip space: one open flute carries more chip per pass, so material comes out faster and the cut stays clean, especially in soft materials.
-
Up-cut spiral: chips are pulled upward and out of the groove as the tool cuts. The cutting area stays clear, the bit clogs less, and the bottom of the cut comes out clean.
-
Sharper edge: a single flute can be ground sharper than a multi-flute tool. On soft materials where surface quality matters, the wall finish shows it.
-
Less heat: fewer flutes mean less friction. The tool holds its edge longer, and heat-sensitive materials keep their shape.
-
Smooth cutting: chips leave the cut instead of packing into the flutes, so the bit jams less and holds feed rate.
-
Where it fits: wood, plastics, acrylic and soft metals such as aluminum, on any CNC job where you want fast material removal with a clean bottom face.
-
Clean bottom finish: the upcut motion leaves a smooth, even bottom face. When the underside is the side that shows, this is the direction you want.
-
-
Woodworking:
- CNC Routing: Ideal for cutting, grooving, and profiling wood, providing clean and accurate cuts with minimal tear-out on the bottom.
- Edge Finishing: Used for trimming edges on laminated wood, MDF, or plywood, delivering a clean edge on the bottom side.
