- PCD Tools For Wood
- Replaceable Insert Router Bits
- CNC End Mill
- Cutter Head
- Woodworking Tools
- Industries Knives
- Carbide Burr
- Carbide Rotary Burr
- Tungsten Carbide Burr Bits
- Tungsten Carbide Burr Set
- Cylindrical Carbide Burr
- Long Shank Carbide Burr
- Double Cut Carbide Burr
- Flame Carbide Burr
- Cone Carbide Burr
- Burr Blanks
- Carbide Rods
- Tire Reamer Bit
- Tungsten Carbide End Mill
- Carbide Tire Studs
- Snow Tire Studs
- ATV Tire Studs
- Motorcycle Tire Studs
- Mining & Oiling
TCT Straight 2 Flutes Drill Bits For Wood
TCT straight 2-flute drills for wood with optional AlTiN/TiAlN/TiCN/TiN coatings. Clean straight holes in panels.
The VPOINT TCT Straight 2 Flutes Drill Bits For Wood is a carbide boring and drilling tool. Ideal for straight drilling on CNC and drilling lines, hardware and dowel holes and high-volume panel drilling.
Design and Construction
The TCT straight 2-flute drill bits for wood carry tungsten carbide tips on steel bodies for straight drilling in wood and panels. The specifications table lists the product attributes as stated by the factory, including material (tungsten carbide steel) and coating options (AlTiN, TiAlN, TiCN, TiN).
How It Works
Two straight flutes drill a round, clean-walled hole at stable diameter: the carbide tip centres, cuts and holds size in abrasive boards. Coating options extend edge life further for high-volume lines.
Applications
- Straight drilling on CNC and drilling lines
- Hardware and dowel holes
- High-volume panel drilling
- Cabinet production
Suitable Materials
- Melamine-faced particleboard
- MDF and laminated boards
- Plywood
- Solid wood
Carbide tips and optional coatings hold hole diameter across high-volume drilling.
Material Comparison: Tungsten Carbide vs. High-Speed Steel
This drill carries tungsten carbide — the production standard for woodworking lines. The figures below are typical industry data showing where carbide and HSS each win, so you can match the material to the job.
| Property | Tungsten Carbide (This Drill) | High-Speed Steel (HSS) |
|---|---|---|
| Hardness | 1,500–2,000 HV | ~850 HV (65 HRC) |
| Hot hardness | Keeps hardness at ~900–1,000 °C | Softens above ~600 °C |
| Edge life in abrasive board | Long baseline life in MDF/particleboard | Shorter — dulled quickly by adhesives and mineral fillers |
| Hole quality over life | Hole diameter holds as the edge wears slowly | Diameter shrinks visibly as the point wears |
| Regrind | 4–6 regrinds typical | 2–3 regrinds, softer edge deforms faster |
| Brittleness | Higher — avoid side loads and impacts | Lower — more forgiving of misuse |
| Suited for | Production drilling in MDF, particleboard, plywood, solid wood | Light-duty and occasional drilling |
Figures are typical published values; actual tool life depends on the workpiece material, feed rate, spindle speed and cooling.
Delivery Scope
Single bit, box quantities on request. Order by the diameter and length stated in the specifications table below.
Why Choose VPOINT
- One-year warranty on every cutter — defects in material or workmanship are covered for 12 months from delivery.
- Custom tooling — diameters, shanks, cutting lengths and flute configurations built to your drawing or sample.
- Non-standard fabrication — sizes outside the standard catalogue, including special geometries.
- Resharpening service — cutters return to service after regrinding at a fraction of new-tool cost.
- Factory-direct since 2008 — ISO 9001 manufacturing in Sichuan and Dongguan, China; no trading intermediaries.
Send a drawing, a sample or a worn tool, and our engineering team will quote the exact specification you need.
Precision & Quality Control
Every cutter is inspected before shipment. Shank diameter, cutting-edge diameter, cutting length and overall length are measured against the values listed in the specifications table, and cutting edge runout is verified on the assembled tool.
Tools measuring outside tolerance do not ship. Inspection is performed under our ISO 9001 quality system, with batch records retained for traceability.
Specifications
| Brand Name | VPOINT Carbide |
| Model Number | tct |
| Material | Carbide |
| Coating | AlTiN, TiAIN, TiCN, Tin |
| Material | Tungsten Carbide Steel |
| Product Name | Cnc Milling Cutter Tools |
| Flute | 2 Flutes |
| MOQ | 10 pcs |
| Size | 5-12mm |
| Packing | Plastic Box + Carton |
| TRANSPORT | Express Delivery |
| Delivery Time | 7-15 Days Afrer Payment |
| Customized support | OEM, ODM |
| Place of Origin | China |
| Sichuan |
| Diameter(D)φ | CEL | SHK | Teeth |
| 2 | 6 | 1/2″, 12 | 2 |
| 2 | 8 | 1/2″, 12 | 2 |
| 3 | 10 | 1/2″, 12 | 2 |
| 3 | 12 | 1/2″, 12 | 2 |
| 3 | 15 | 1/2″, 12 | 2 |
| 3 | 18 | 1/2″, 12 | 2 |
| 3 | 20 | 1/2″, 12 | 2 |
| 4 | 12 | 1/2″, 12 | 2 |
| 4 | 15 | 1/2″, 12 | 2 |
| 4 | 20 | 1/2″, 12 | 2 |
| 4 | 25 | 1/2″, 12 | 2 |
| 4 | 30 | 1/2″, 12 | 2 |
| 5 | 12 | 1/2″, 12 | 2 |
| 5 | 15 | 1/2″, 12 | 2 |
| 5 | 20 | 1/2″, 12 | 2 |
| 5 | 22 | 1/2″, 12 | 2 |
| 5 | 25 | 1/2″, 12 | 2 |
| 5 | 30 | 1/2″, 12 | 2 |
| 6 | 12 | 1/2″, 12 | 2 |
Key words: TCT drill bit, straight flute drill, 2 flute wood drill, coated carbide drill
\n\n
