How hard is the cutting material?

The carbide grade used in this pre-milling cutters delivers 7,000–9,000 HV / 1,500–2,000 HV hardness, which keeps the cutting edge sharp under continuous load.

Can you supply OEM or ODM parts, and how fast?

Yes. VPOINT TOOLS runs two factories in China (Chengdu and Dongguan) and accepts OEM and ODM orders. Standard samples and in-stock items ship within 24-48 hours; custom tooling is quoted per specification.

Which machines and materials is this pre-milling cutters used for?

It is used on CNC routers, table saws and spindle moulders for cutting particle board, MDF, plywood, solid wood and aluminium composite panels. Chipbreaker or replaceable-insert models are available for high-volume production runs.

Do you ship worldwide?

Yes. VPOINT TOOLS ships carbide and PCD woodworking tooling to more than 100 countries. Tell us the destination and application and we will confirm freight cost and lead time.

Pre-Milling Cutters

Pre-milling cutters, D 80-125 mm, Z=3+3 two-stage, bore 20/30 mm, width 35-65 mm. PCD edges for the pre-milling station of edge banders.

The VPOINT Pre-Milling Cutters are a CNC milling cutter. Ideal for pre-milling on edge banding machines, edge preparation before banding and removal of saw overhang and old glue lines.

Product Description

The VP-Y pre-milling cutter series pairs PCD cutting edges with steel cutterhead bodies for the pre-milling station of edge banding machines, in 80, 100, 120 and 125 mm diameters. Head width, bore and tooth count follow the specifications table and are produced to the station.

Design and Construction

The VP-Y pre-milling cutter series pairs PCD cutting edges with steel cutterhead bodies for the pre-milling station of edge banding machines. Diameters (ØD) run 80, 100, 120 and 125 mm with bores (Ød) of 20 and 30 mm, cutting widths (H) from 35 to 65 mm, and two-stage 3+3 tooth designs (Z=3+3) across the range.

How It Works

At the pre-milling station the cutter removes the saw overhang, chips and old glue line from the panel edge before banding, leaving a fresh, square edge the banding station can bond to. The 3+3 two-stage design roughs the edge with one tooth group and finishes it with the second, so a single pass delivers the finished edge. PCD edges hold their geometry in abrasive melamine-faced board across long shifts.

Applications

Pre-milling on edge banding machines
Edge preparation before banding
Removal of saw overhang and old glue lines
Panel furniture production lines

Suitable Materials

Melamine-faced particleboard
MDF and laminated boards
Veneered plywood
Solid wood edge panels

The PCD edges hold the milled edge square and clean in abrasive faced boards, keeping banding quality consistent.

Material Comparison: PCD vs. Tungsten Carbide

The figures below are typical industry data for production woodworking. PCD does not replace carbide in every job — carbide remains the right choice for steel, cast iron and low-volume general work — but on abrasive sheet goods the difference in service life is decisive.

Property	PCD Diamond (This Tool)	Tungsten Carbide
Hardness	7,000–9,000 HV	1,500–2,000 HV
Tool life on MDF / particleboard / melamine	15–20× longer (500–1,200 h)	30–60 h (baseline)
Tool life on solid hardwood	10–13× longer (800–2,000 h)	80–150 h (baseline)
Tool life on acrylic / plastics	10–15× longer (1,000–3,000 h)	100–200 h (baseline)
Resharpening cycles	5–8 regrinds (thick tips up to 10); each pass removes only 0.2–0.3 mm of diamond	4–6 regrinds, each removing more material
Surface finish	Ra ≤ 0.2 μm achievable, stable over the tool life	Ra ~0.8 μm typical, degrades as the edge wears
Thermal conductivity	540–560 W/m·K — heat leaves the edge fast	~80 W/m·K
Friction coefficient	≈ 0.05 — lower cutting forces	≈ 0.3
Suited for	Abrasive engineered wood, laminates, composites, plastics, non-ferrous metals	General-purpose; the only choice for steel and cast iron

Figures are typical published values; actual tool life depends on the workpiece material, feed rate, depth of cut, machine condition and maintenance schedule.

Delivery Scope

Single cutter. Order by part number with the diameter, bore, width and tooth count stated in the specifications table below.

Why Choose VPOINT

One-year warranty on every cutter — defects in material or workmanship are covered for 12 months from delivery.
Custom tooling — diameters, bores, cutting widths and tooth counts built to your drawing or sample.
Non-standard fabrication — profiles and sizes outside the standard catalogue, including profile restoration.
Resharpening service — cutters return to service after regrinding at a fraction of new-tool cost.
Factory-direct since 2008 — ISO 9001 manufacturing in Sichuan and Dongguan, China; 40Cr chrome-molybdenum steel bodies; no trading intermediaries.

Send a drawing, a sample or a worn tool, and our engineering team will quote the exact specification you need.

Precision & Quality Control

Every cutter is inspected at micron level before shipment. Cutting diameter (ØD), bore (Ød), cutting width/height (B/H) and overall dimensions are measured against the values listed in the specifications table, and cutting edge runout and concentricity are verified on the assembled tool.

Tools measuring outside tolerance are reground or scrapped — they do not ship. Inspection is performed under our ISO 9001 quality system, with batch records retained for traceability.

Specifications

PART NO.	规格 SIZE	ØD	Ød	H	Z
VP-Y08035	803520 Z=3+3	80	20	35	3+3
VP-Y08050	805020 Z=3+3	80	20	50	3+3
VP-Y08065	806520 Z=3+3	80	20	65	3+3
VP-Y12043	1204330 Z=3+3	120	30	43	3+3
VP-Y10035	1003530 Z=3+3	100	30	35	3+3
VP-Y10048	1004830 Z=3+3	100	30	48	3+3
VP-Y10065	1006530 Z=3+3	100	30	65	3+3
VP-Y12534	1253430 Z=3+3	125	30	34	3+3
VP-Y12543	1254330 Z=3+3	125	30	43	3+3
VP-Y12563	1256330 Z=3+3	125	30	63	3+3
VP-Y12535	1253530 Z=3+3	125	30	35	3+3
VP-Y12565	1256530 Z=3+3	125	30	65	3+3
VP-Y15035	1503530 Z=4+4	150	30	35	3+3
VP-Y15046	1504630 Z=3+3	150	30	46	3+3
VP-Y15065	1506530 Z=3+3	150	30	65	3+3
VP-Y15065B	1506530 Z=4+4	150	30	65	4+4

Frequently Asked Questions

What is the Pre-Milling Cutters used for?

The VP-Y pre-milling cutter series pairs PCD cutting edges with steel cutterhead bodies for the pre-milling station of edge banding machines.

How do I choose the right size?

Refer to the specification table on this page: part numbers fix the cutting diameter, shank and cutting length. State the diameter, shank and cutting length you need when ordering.

Which materials does it suit?

Typical materials include Melamine-faced particleboard, MDF and laminated boards, Veneered plywood. Confirm the material grade and machining conditions for the specific tool before ordering.

Can I order a custom version?

Yes. Send the profile drawing or item code together with the workpiece material, machine model, cutting direction and quantity. Tools are produced to order, and each tool is packed in an individual plastic box.

Key words: pre-milling cutter, edge banding pre mill cutter, PCD premill cutterhead, edge bander milling cutter