How hard is the cutting material?

The carbide grade used in this pcd milling jointing cutter for edge banding delivers 7,000–9,000 HV / 1,500–2,000 HV hardness, which keeps the cutting edge sharp under continuous load.

Can you supply OEM or ODM parts, and how fast?

Yes. VPOINT TOOLS runs two factories in China (Chengdu and Dongguan) and accepts OEM and ODM orders. Standard samples and in-stock items ship within 24-48 hours; custom tooling is quoted per specification.

Which machines and materials is this pcd milling jointing cutter for edge banding used for?

It is used on CNC routers, table saws and spindle moulders for cutting particle board, MDF, plywood, solid wood and aluminium composite panels. Chipbreaker or replaceable-insert models are available for high-volume production runs.

Do you ship worldwide?

Yes. VPOINT TOOLS ships carbide and PCD woodworking tooling to more than 100 countries. Tell us the destination and application and we will confirm freight cost and lead time.

PCD Milling Jointing Cutter For Edge Banding

PCD milling jointing cutters for edge banding, D 80-125 mm, Z=3+3, width 35-65 mm. Jointing cutter programme for edge bander stations.

The VPOINT PCD Milling Jointing Cutter For Edge Banding is a CNC milling cutter. Ideal for jointing/pre-milling on edge banders, edge squaring before banding and panel furniture production lines.

Product Description

The VP-Y PCD milling jointing cutter series pairs PCD cutting edges with steel bodies for the pre-milling and jointing station of edge banding machines, in 80, 100 and 125 mm diameters. Cutterhead width and bore follow the specifications table.

Design and Construction

The VP-Y PCD milling jointing cutter series pairs PCD cutting edges with steel bodies for the pre-milling/jointing station of edge banding machines. Diameters run 80, 100 and 125 mm with bores of 20 and 30 mm, cutting widths of 35 to 65 mm, and two-stage 3+3 tooth designs across the range.

How It Works

The jointing cutter squares the panel edge before banding — the same pre-milling action as the VP-Y series, in our VP part-number programme. The 3+3 design roughs and finishes the edge in one pass, and PCD edges hold the square geometry in abrasive melamine-faced board.

Applications

Jointing/pre-milling on edge banders
Edge squaring before banding
Panel furniture production lines
High-volume edge banding

Suitable Materials

Melamine-faced particleboard
MDF and laminated boards
Veneered plywood
Solid wood edge panels

The PCD edges keep the jointed edge square and clean in abrasive boards across long runs.

Material Comparison: PCD vs. Tungsten Carbide

The figures below are typical industry data for production woodworking. PCD does not replace carbide in every job — carbide remains the right choice for steel, cast iron and low-volume general work — but on abrasive sheet goods the difference in service life is decisive.

Property	PCD Diamond (This Tool)	Tungsten Carbide
Hardness	7,000–9,000 HV	1,500–2,000 HV
Tool life on MDF / particleboard / melamine	15–20× longer (500–1,200 h)	30–60 h (baseline)
Tool life on solid hardwood	10–13× longer (800–2,000 h)	80–150 h (baseline)
Tool life on acrylic / plastics	10–15× longer (1,000–3,000 h)	100–200 h (baseline)
Resharpening cycles	5–8 regrinds (thick tips up to 10); each pass removes only 0.2–0.3 mm of diamond	4–6 regrinds, each removing more material
Surface finish	Ra ≤ 0.2 μm achievable, stable over the tool life	Ra ~0.8 μm typical, degrades as the edge wears
Thermal conductivity	540–560 W/m·K — heat leaves the edge fast	~80 W/m·K
Friction coefficient	≈ 0.05 — lower cutting forces	≈ 0.3
Suited for	Abrasive engineered wood, laminates, composites, plastics, non-ferrous metals	General-purpose; the only choice for steel and cast iron

Figures are typical published values; actual tool life depends on the workpiece material, feed rate, depth of cut, machine condition and maintenance schedule.

Delivery Scope

Single cutter. Order by part number with the diameter, bore, width and tooth count stated in the specifications table below.

Why Choose VPOINT

One-year warranty on every cutter — defects in material or workmanship are covered for 12 months from delivery.
Custom tooling — diameters, bores, cutting widths and tooth counts built to your drawing or sample.
Non-standard fabrication — profiles and sizes outside the standard catalogue, including profile restoration.
Resharpening service — cutters return to service after regrinding at a fraction of new-tool cost.
Factory-direct since 2008 — ISO 9001 manufacturing in Sichuan and Dongguan, China; 40Cr chrome-molybdenum steel bodies; no trading intermediaries.

Send a drawing, a sample or a worn tool, and our engineering team will quote the exact specification you need.

Precision & Quality Control

Every cutter is inspected at micron level before shipment. Cutting diameter (ØD), bore (Ød), cutting width/height (B/H) and overall dimensions are measured against the values listed in the specifications table, and cutting edge runout and concentricity are verified on the assembled tool.

Tools measuring outside tolerance are reground or scrapped — they do not ship. Inspection is performed under our ISO 9001 quality system, with batch records retained for traceability.

Specifications

ID number	Diameter	bore	cutting width	Z
VP-Y08035	80	20	35	3+3
VP-Y08050	80	20	50	3+3
VP-Y10035	100	30	35	3+3
VP-Y10048	100	30	48	3+3
VP-Y10065	100	30	65	3+3
VP-Y12035	125	30	35	3+3
VP-Y12540	125	30	40	3+3
VP-Y12543	125	30	43	3+3
VP-Y12548	125	30	48	3+3
VP-Y12555	125	30	55	3+3
VP-Y12565	125	30	65	3+3
VP-Y15035	150	30	35	4+4
VP-Y15043	150	30	43	4+4
VP-Y15065	150	30	65	4+4

Frequently Asked Questions

What is the PCD Milling Jointing Cutter For Edge Banding used for?

The VP-Y PCD milling jointing cutter series pairs PCD cutting edges with steel bodies for the pre-milling/jointing station of edge banding machines.

How do I choose the right size?

Refer to the specification table on this page: part numbers fix the cutting diameter, shank and cutting length. State the diameter, shank and cutting length you need when ordering.

Which materials does it suit?

Typical materials include Melamine-faced particleboard, MDF and laminated boards, Veneered plywood. Confirm the material grade and machining conditions for the specific tool before ordering.

Can I order a custom version?

Yes. Send the profile drawing or item code together with the workpiece material, machine model, cutting direction and quantity. Tools are produced to order, and each tool is packed in an individual plastic box.

Key words: jointing cutter, edge banding jointing cutter, PCD milling cutter, pre milling jointing cutter

\n\n