- PCD Tools For Wood
- Replaceable Insert Router Bits
- CNC End Mill
- Cutter Head
- Woodworking Tools
- Industries Knives
- Carbide Burr
- Carbide Rotary Burr
- Tungsten Carbide Burr Bits
- Tungsten Carbide Burr Set
- Cylindrical Carbide Burr
- Long Shank Carbide Burr
- Double Cut Carbide Burr
- Flame Carbide Burr
- Cone Carbide Burr
- Burr Blanks
- Carbide Rods
- Tire Reamer Bit
- Tungsten Carbide End Mill
- Carbide Tire Studs
- Snow Tire Studs
- ATV Tire Studs
- Motorcycle Tire Studs
- Mining & Oiling
Diamond Raising Cutter For Floor
Diamond raising cutters for floor, D 160-285 mm, B 4.5-10 mm, Z 12-36. PCD profile cutterheads for flooring edge forming.
The VPOINT Diamond Raising Cutter For Floor is a carbide woodworking cutting tool. Ideal for edge profile forming on flooring lines, laminate flooring production and panel edge raising and finishing.
The VP0051 diamond raising cutter is a PCD-tipped profile cutterhead for flooring production lines, with diameters from 160 to 285 mm on 40 and 60 mm bores and cutting widths of 4.5, 7 and related sizes as listed in the specifications table. Cutterheads are built to the line’s profile and bore.
Design and Construction
The VP0051 diamond raising cutter is a PCD-tipped profile cutterhead for flooring production lines. Diameters (ØD) run 160 to 285 mm with bores (Ød) of 40 and 60 mm, cutting widths (B) of 4.5, 7 and 10 mm and tooth counts of 12 to 36 matched to each diameter.
How It Works
The cutterhead raises and forms the panel edge profile as the board feeds past on the flooring line. With up to 36 PCD-tipped teeth the cutting load is spread thinly, leaving a clean profile surface at high line speeds.
Applications
- Edge profile forming on flooring lines
- Laminate flooring production
- Panel edge raising and finishing
- High-speed flooring lines
Suitable Materials
- HDF flooring board
- Melamine-faced boards
- Engineered wood flooring
- Veneered panels
The PCD profile holds its geometry in abrasive flooring board at line speed, keeping edge dimensions consistent.
Material Comparison: PCD vs. Tungsten Carbide
The figures below are typical industry data for production woodworking. PCD does not replace carbide in every job — carbide remains the right choice for low-volume general work — but on abrasive sheet goods the difference in blade life is decisive.
| Property | PCD Diamond (This Blade) | Tungsten Carbide |
|---|---|---|
| Hardness | 7,000–9,000 HV | 1,500–2,000 HV |
| Tool life on MDF / particleboard / melamine | 15–20× longer (500–1,200 h) | 30–60 h (baseline) |
| Tool life on solid hardwood | 10–13× longer (800–2,000 h) | 80–150 h (baseline) |
| Tool life on abrasive boards (fibre cement / composites) | 10–15× longer | baseline |
| Edge renewal | Limited regrinds — the economics come from 15–20× longer intervals between changes, not regrind count | 4–6 regrinds at shorter intervals |
| Cut finish | Ra ≤ 0.2 μm achievable, stable over the blade life | Ra ~0.8 μm typical, degrades as teeth wear |
| Thermal conductivity | 540–560 W/m·K — heat leaves the tooth tip fast | ~80 W/m·K |
| Friction coefficient | ≈ 0.05 — lower cutting forces and heat | ≈ 0.3 |
| Suited for | Abrasive engineered wood, laminates, composites, fibre cement, non-ferrous metals | General-purpose solid-wood work; the economic choice at lower volumes |
Figures are typical published values; actual blade life depends on the workpiece material, feed rate, depth of cut, machine condition and maintenance schedule.
Delivery Scope
Single cutter. Order by part number with the diameter, bore, width and tooth count stated in the specifications table below.
Why Choose VPOINT
- One-year warranty on every blade — defects in material or workmanship are covered for 12 months from delivery.
- Custom tooling — diameters, kerfs, bores and tooth counts built to your drawing or sample.
- Non-standard fabrication — sizes outside the standard catalogue, including bore re-sizing and tooth-count changes.
- Resharpening service — blades return to service after regrinding at a fraction of new-blade cost.
- Factory-direct since 2008 — ISO 9001 manufacturing in Sichuan and Dongguan, China; 40Cr chrome-molybdenum steel bodies; no trading intermediaries.
Send a drawing, a sample or a worn blade, and our engineering team will quote the exact specification you need.
Precision & Quality Control
Every blade is inspected before shipment. Outside diameter, kerf thickness, plate thickness, bore diameter and tooth count are measured against the values listed in the specifications table, and tooth geometry (hook angle, bevel angle) is verified against the design drawing. Blades are stress-checked for runout and tension before packing.
Blades measuring outside tolerance do not ship. Inspection is performed under our ISO 9001 quality system, with batch records retained for traceability.
Specifications
| Part No. | ØD | Ød | B | Z |
|---|---|---|---|---|
| VP005101 | 160 | 40 | 7 | 12 |
| VP005102 | 160 | 40 | 4.5 | 12 |
| VP005103 | 220 | 60 | 7 | 36 |
| VP005104 | 220 | 60 | 4.5 | 36 |
| VP005105 | 250 | 60 | 7 | 36 |
| VP005106 | 250 | 60 | 4.5 | 36 |
| VP005107 | 285 | 60 | 10 | 36 |
Frequently Asked Questions
What is the Diamond Raising Cutter For Floor used for?
The VP0051 diamond raising cutter is a PCD-tipped profile cutterhead for flooring production lines.
How do I choose the right size?
Refer to the specification table on this page: part numbers fix the cutting diameter, shank and cutting length. State the diameter, shank and cutting length you need when ordering.
Which materials does it suit?
Typical materials include HDF flooring board, Melamine-faced boards, Engineered wood flooring. Confirm the material grade and machining conditions for the specific tool before ordering.
Can I order a custom version?
Yes. Send the profile drawing or item code together with the workpiece material, machine model, cutting direction and quantity. Tools are produced to order, and each tool is packed in an individual plastic box.
Key words: raising cutter, floor profile cutter, diamond raising cutterhead, PCD flooring cutter
