Edge Banding Machine Blade

Design and Construction — a VPOINT end mill tool for CNC milling, sized for MDF and similar workpieces. The specification table below lists dimensions; the performance data table gives standard reference speeds and feeds to start with, and the FAQ covers selection, parameters and service. ISO 9001 production, batch-verified, custom sizes from drawings.

The VP0060 edge banding machine blade is a two-tooth PCD corner-rounding blade, 20 × 12 × 2 mm, offered in R1 to R3 radius values as listed in the specifications table. The PCD edge rounds the banded corner without re-cutting the panel face, and the blade runs on the trim station’s standard holder.

Design and Construction

The VP0060 edge banding machine blades are small PCD-tipped corner-rounding blades, 20 x 12 x 2 mm, two teeth (Z2), offered in radius values (R) of 1, 1.2, 1.5, 2.5 and 3 mm as listed in the specifications table. The material column lists HW+PCD (tungsten carbide with PCD).

How It Works

These small blades sit in the corner-rounding units of edge banding machines: the radius edge (R) forms the rounded corner profile on the band as the panel passes. PCD cutting edges hold the small radius — the geometry that carbide rounds off fastest in abrasive band material.

Applications

• Corner rounding units on edge banders
• Radius forming on banded edges
• Furniture panel edge finishing
• Small tool stations on panel lines

Suitable Materials

• Edge banding strips (PVC, ABS, melamine, wood veneer)
• Melamine-faced particleboard
• MDF and laminated boards
• Veneered panels

The PCD edges hold the corner radius in abrasive banding material, keeping the rounded profile crisp.

Material Comparison: PCD vs. Tungsten Carbide

The figures below are typical industry data for production woodworking. PCD does not replace carbide in every job — carbide remains the right choice for steel, cast iron and low-volume general work — but on abrasive sheet goods the difference in service life is decisive.

Figures are typical published values; actual tool life depends on the workpiece material, feed rate, depth of cut, machine condition and maintenance schedule.

Delivery Scope

Single blade. Order by part number with the radius value stated in the specifications table below.

Why Choose VPOINT

• One-year warranty on every cutter — defects in material or workmanship are covered for 12 months from delivery.
• Custom tooling — diameters, bores, cutting widths and tooth counts built to your drawing or sample.
• Non-standard fabrication — profiles and sizes outside the standard catalogue, including profile restoration.
• Resharpening service — cutters return to service after regrinding at a fraction of new-tool cost.
• Factory-direct since 2008 — ISO 9001 manufacturing in Sichuan and Dongguan, China; 40Cr chrome-molybdenum steel bodies; no trading intermediaries.

Send a drawing, a sample or a worn tool, and our engineering team will quote the exact specification you need.

Precision & Quality Control

Every cutter is inspected at micron level before shipment. Cutting diameter (ØD), bore (Ød), cutting width/height (B/H) and overall dimensions are measured against the values listed in the specifications table, and cutting edge runout and concentricity are verified on the assembled tool.

Tools measuring outside tolerance are reground or scrapped — they do not ship. Inspection is performed under our ISO 9001 quality system, with batch records retained for traceability.

Specifications

Performance Data

Standard reference values for guidance only — always adjust to the edge bander feed, machine condition and tool wear, and confirm on the actual panel.

Frequently Asked Questions

What is the Edge Banding Machine Blade used for?

The VP0060 edge banding machine blades are small PCD-tipped corner-rounding blades, 20 x 12 x 2 mm, two teeth (Z2), offered in radius values (R) of 1, 1.2, 1.5, 2.5 and 3 mm as listed in the specifications table.

How do I choose the right size?

Refer to the specification table on this page: part numbers fix the cutting diameter, shank and cutting length. State the diameter, shank and cutting length you need when ordering.

Which materials does it suit?

Typical materials include Edge banding strips (PVC, ABS, melamine, wood veneer), Melamine-faced particleboard, MDF and laminated boards. Confirm the material grade and machining conditions for the specific tool before ordering.

Can I order a custom version?

Yes. Send the profile drawing or item code together with the workpiece material, machine model, cutting direction and quantity. Tools are produced to order, and each tool is packed in an individual plastic box.

Key words: edge banding blade, corner rounding blade, edge bander radius cutter, PCD corner round blade, PCD premill cutter, pre-milling cutter head, edge banding premill, PCD edge banding cutter, premilling router bit, reversible knives, rota-tip bit, constant cutting diameter, rotate insert 90 degrees, double the cutting life, on-machine knife change, ER collet, 1/2-inch shank insert bit, spoilboard surfacing ROI, nested-based manufacturing, furniture manufacturing, furniture factory, cabinet making, panel furniture, kitchen cabinet production, woodworking machinery, CNC router, woodworking cutting tools

What spindle speed and feed should I set for premilling MDF?

＋Start near 20,000–24,000 rpm spindle speed with the edge bander feed around 12–18 m/min, then fine-tune so the premill removes the saw overhang and old glue line in one clean pass.

Why PCD instead of brazed tungsten carbide for premilling?

＋On abrasive MDF and particleboard, PCD edges last 10–20 times longer (typical industry data cited in our comparison table above), so the bander runs far longer between tool changes.

How often should the premill knives be rotated or replaced?

＋Rotate the reversible inserts at the first sign of glue-line fuzzing; each edge has several usable sections, so a fresh edge takes seconds on the machine.

Sources & standards: ISO 9001 quality management · UNSPSC commodity codes · eClass product classification