- PCD Tools For Wood
- Replaceable Insert Router Bits
- CNC End Mill
- Cutter Head
- Woodworking Tools
- Industries Knives
- Carbide Burr
- Carbide Rotary Burr
- Tungsten Carbide Burr Bits
- Tungsten Carbide Burr Set
- Cylindrical Carbide Burr
- Long Shank Carbide Burr
- Double Cut Carbide Burr
- Flame Carbide Burr
- Cone Carbide Burr
- Burr Blanks
- Carbide Rods
- Tire Reamer Bit
- Tungsten Carbide End Mill
- Carbide Tire Studs
- Snow Tire Studs
- ATV Tire Studs
- Motorcycle Tire Studs
- Mining & Oiling
T007 V-Series,3Z Nano coating,straight Bit price list
T007 V-Series 3Z straight bits, 1/2″ shank, D 6–12 mm, cutting length 20–50 mm, nano coating. Three-flute carbide bits for high-feed panel machining.
The VPOINT T007 V-Series,3Z Nano coating,straight Bit price list is a carbide woodworking cutting tool. Ideal for straight cutting and sizing on CNC routers, grooving and slotting in panels and nested-based manufacturing.
Design and Construction
The T007 V-Series 3-flute straight bit carries a nano coating on a fine-grain tungsten carbide body. Shank (Ød) is 12.7 mm (1/2″) across the series; cutting diameters (ØD) run 6–12 mm and cutting lengths (L1) 20–50 mm, with three teeth (Z3) on every part number in the specifications table.
How It Works
Three flutes spread the cutting load across more edges than a two-flute bit, so each pass takes a higher feed at the same finish level. The nano coating lowers friction and raises surface hardness, slowing edge wear in abrasive MDF and melamine-faced panels.
Applications
- Straight cutting and sizing on CNC routers
- Grooving and slotting in panels
- Nested-based manufacturing
- High-feed panel machining
Suitable Materials
- MDF and melamine-faced panels
- Particleboard and laminated boards
- Veneered plywood
- Solid wood
The nano-coated edges hold cutting diameter and finish in abrasive sheet goods across long runs.
Material Comparison: Tungsten Carbide vs. PCD
The figures below are typical industry data for CNC tooling. Tungsten carbide is the economic standard for general CNC routing — tough, regrindable and available in every geometry. PCD wins on very high-volume abrasive work; this page covers the carbide line, and the comparison shows where each material wins so you can match the tool to the job.
| Property | Tungsten Carbide (This Tool) | PCD Diamond |
|---|---|---|
| Hardness | 1,500–2,000 HV | 7,000–9,000 HV |
| Tool life on MDF / particleboard / melamine | 30–60 h (baseline) | 15–20× longer (500–1,200 h) |
| Tool life on solid hardwood | 80–150 h (baseline) | 10–13× longer (800–2,000 h) |
| Edge renewal | 4–6 regrinds at shorter intervals | 5–8 regrinds, each removing only 0.2–0.3 mm of diamond |
| Surface finish | Ra ~0.8 μm typical, degrades as the edge wears | Ra ≤ 0.2 μm achievable, stable over the tool life |
| Thermal conductivity | ~80 W/m·K | 540–560 W/m·K — heat leaves the edge fast |
| Friction coefficient | ≈ 0.3 | ≈ 0.05 — lower cutting forces |
| Fracture toughness | Higher — tolerates interrupted cuts and impacts better | Lower — needs stable, vibration-free setups |
| Suited for | General-purpose CNC routing in wood, panels, acrylic; the economic standard | Very high-volume abrasive panel work; non-ferrous metals |
Figures are typical published values; actual tool life depends on the workpiece material, feed rate, depth of cut, machine condition and maintenance schedule.
Delivery Scope
Single bit. Order by part number with the shank, diameter and cutting length stated in the specifications table below.
Why Choose VPOINT
- One-year warranty on every cutter — defects in material or workmanship are covered for 12 months from delivery.
- Custom tooling — diameters, shanks, cutting lengths and flute configurations built to your drawing or sample.
- Non-standard fabrication — sizes outside the standard catalogue, including special geometries.
- Resharpening service — cutters return to service after regrinding at a fraction of new-tool cost.
- Factory-direct since 2008 — ISO 9001 manufacturing in Sichuan and Dongguan, China; no trading intermediaries.
Send a drawing, a sample or a worn tool, and our engineering team will quote the exact specification you need.
Precision & Quality Control
Every cutter is inspected before shipment. Shank diameter, cutting-edge diameter, cutting length and overall length are measured against the values listed in the specifications table, and cutting edge runout is verified on the assembled tool.
Tools measuring outside tolerance do not ship. Inspection is performed under our ISO 9001 quality system, with batch records retained for traceability.
Specifications
| Part NO. | 规格SIZE | Ød | ØD | L1 | Z |
|---|---|---|---|---|---|
| T007-V0620 | 1/2*6*20 | 12.7 | 6 | 20 | 3 |
| T007-V0622 | 1/2*6*22 | 12.7 | 6 | 22 | 3 |
| T007-V0625 | 1/2*6*25 | 12.7 | 6 | 25 | 3 |
| T007-V0628 | 1/2*6*28 | 12.7 | 6 | 28 | 3 |
| T007-V0630 | 1/2*6*30 | 12.7 | 6 | 30 | 3 |
| T007-V0820 | 1/2*8*20 | 12.7 | 8 | 20 | 3 |
| T007-V0822 | 1/2*8 *22 | 12.7 | 8 | 22 | 3 |
| T007-V0825 | 1/2*8*25 | 12.7 | 8 | 25 | 3 |
| T007-V0828 | 1/2*8*28 | 12.7 | 8 | 28 | 3 |
| T007-V0830 | 1/2*8*30 | 12.7 | 8 | 30 | 3 |
| T007-V0832 | 1/2*8*32 | 12.7 | 8 | 32 | 3 |
| T007-V0830 | 1/2*8*35 | 12.7 | 8 | 35 | 3 |
| T007-V1020 | 1/2*10*20 | 12.7 | 10 | 20 | 3 |
| T007-V1023 | 1/2*10*23 | 12.7 | 10 | 23 | 3 |
| T007-V1025 | 1/2*10*25 | 12.7 | 10 | 25 | 3 |
| T007-V1028 | 1/2*10*28 | 12.7 | 10 | 28 | 3 |
| T007-V1030 | 1/2*10*30 | 12.7 | 10 | 30 | 3 |
| T007-V1033 | 1/2*10*33 | 12.7 | 10 | 33 | 3 |
| T007-V1035 | 1/2*10*35 | 12.7 | 10 | 35 | 3 |
| T007-V1040 | 1/2*10*40 | 12.7 | 10 | 40 | 3 |
| T007-V1050 | 1/2*10*50 | 12.7 | 10 | 50 | 3 |
| T007-V1225 | 1/2x12x25 | 12.7 | 12.00 | 25 | 3 |
| T007-V1230 | 1/2x12x30 | 12.7 | 12.00 | 30 | 3 |
| T007-V1235 | 1/2x12x35 | 12.7 | 12.00 | 35 | 3 |
| T007-V1240 | 1/2x12x40 | 12.7 | 12.00 | 40 | 3 |
| T007-V1250 | 1/2x12x50 | 12.7 | 12.00 | 50 | 3 |
Key words: T007 straight bit, 3 flute router bit, nano coating end mill, CNC panel bit
