- PCD Tools For Wood
- Replaceable Insert Router Bits
- CNC End Mill
- Cutter Head
- Woodworking Tools
- Industries Knives
- Carbide Burr
- Carbide Rotary Burr
- Tungsten Carbide Burr Bits
- Tungsten Carbide Burr Set
- Cylindrical Carbide Burr
- Long Shank Carbide Burr
- Double Cut Carbide Burr
- Flame Carbide Burr
- Cone Carbide Burr
- Burr Blanks
- Carbide Rods
- Tire Reamer Bit
- Tungsten Carbide End Mill
- Carbide Tire Studs
- Snow Tire Studs
- ATV Tire Studs
- Motorcycle Tire Studs
- Mining & Oiling
PCD Fine Trimming Cutter for Edge Banders
This PCD fine trimming cutter is designed for finishing edge-banded panels after rough trimming. It produces the final profile on compatible edge banding machines for cabinet, door and panel-furniture production.
PCD Fine Trimming Cutter for Edge Banders for Edge Banding Machines
This PCD fine trimming cutter is designed for finishing edge-banded panels after rough trimming. It produces the final profile on compatible edge banding machines for cabinet, door and panel-furniture production.
Design and Construction
The 75 mm cutter body carries 4 or 6 PCD teeth with a 16 mm cutting height and bores of 20 or 22 mm. Corner radii of R1.5, R2 and R3 are listed. Machine interface, rotation direction and the final profile must be confirmed before ordering.
How It Works
Mounted in the fine trimming unit, the cutter machines the final edge-band profile in one pass after the rough trim. The PCD cutting edges hold the corner radius accurately through long production runs, keeping the finished edge consistent from the first panel to the last.
Applications
- Fine trimming after edge application
- Final profiling of edge-banded panels
- Panel furniture, cabinet and door production
Suitable Materials
- Edge-banded MDF and particleboard
- Veneered panels
- Thermoplastic and solid wood edge bands
Material Comparison: Tungsten Carbide vs. Diamond (PCD) Cutter Head
Typical industry data for reference. Actual results depend on the panel grade, machine condition and feed rate.
| Property | Tungsten Carbide Cutter Head | Diamond (PCD) Cutter Head |
| Cutting material hardness | 1,500–2,000 HV | 7,000–9,000 HV |
| Service life on MDF / particleboard | Baseline (1×) | 10–20× longer edge life |
| Regrinding / refurbishing cycles | 2–4 times | 5–8 times |
| Cut edge quality | Ra 0.4–0.8 µm, more fuzzing | Ra 0.2–0.4 µm, cleaner edge |
| Thermal conductivity | ≈ 100 W/m·K | ≈ 500 W/m·K, heat cleared faster |
| Friction coefficient | ≈ 0.3 | ≈ 0.05–0.1, lower cutting force |
| Chipping risk on brittle panels | Higher at high feed | Lower, stable edge at high feed |
| Cutter change frequency | More frequent | Fewer changes, less downtime |
| Cost per metre of edge | Higher over long runs | Lower over long runs |
Delivery Scope
Each order includes the selected cutter head configuration, protective packaging and an inspection record. Matched pairs, keyed bores and non-standard heights are produced to order after the machine details are confirmed.
Why Choose VPOINT
- One-year warranty on every cutter head
- Custom and non-standard sizes supported, including keyed bores and matched pairs
- Regrinding service to extend tool life
- Factory direct since 2008, ISO 9001 certified
- Dual manufacturing bases in Sichuan and Dongguan, China
Precision & Quality Control
Every cutter head is inspected at micron level before shipment: bore diameter, mounting runout, body concentricity and insert seat geometry are checked against the drawing. Production follows an ISO 9001 process with batch traceability, so reorders match the original configuration.
Specifications
Specify the required R1.5, R2 or R3 profile, edge-band thickness, bore, tooth count and rotation with the order.
| Diameter D mm | Cutting Height H mm | Bore d mm | Teeth Z | Radius R mm |
|---|---|---|---|---|
| 75 | 16 | 20 / 22 | 4 / 6 | 1.5 / 2 / 3 |
Frequently Asked Questions
Which corner radii are available?
R1.5, R2 and R3 are listed on the 75 mm body. Specify the required radius together with the edge-band thickness.
Which bore and tooth options are offered?
Bores of 20 or 22 mm and tooth counts of 4 or 6. Confirm the rotation direction and machine model so a complete configuration is confirmed.
Does it replace the rough trimming cutter?
No. Fine trimming machines the final profile after rough trimming has removed the excess band. Both units run in sequence on the edge bander.
What should I send to check fit?
The trimming-unit model or a photo of the current cutter, plus the edge-band material, thickness, required radius, bore, tooth count and rotation.
Key words: PCD fine trimming cutter, edge bander fine trim, diamond profile cutter, R2 corner trimming cutter
