How hard is the cutting material?

The carbide grade used in this pcd straight edge trimming cutter delivers 1,500-2,000 HV / 7,000-9,000 HV hardness, which keeps the cutting edge sharp under continuous load.

Can you supply OEM or ODM parts, and how fast?

Yes. VPOINT TOOLS runs two factories in China (Chengdu and Dongguan) and accepts OEM and ODM orders. Standard samples and in-stock items ship within 24-48 hours; custom tooling is quoted per specification.

Which machines and materials is this pcd straight edge trimming cutter used for?

It is used on CNC routers, table saws and spindle moulders for cutting particle board, MDF, plywood, solid wood and aluminium composite panels. Chipbreaker or replaceable-insert models are available for high-volume production runs.

Do you ship worldwide?

Yes. VPOINT TOOLS ships carbide and PCD woodworking tooling to more than 100 countries. Tell us the destination and application and we will confirm freight cost and lead time.

PCD Straight Edge Trimming Cutter

PCD straight edge trimming cutter for MDF, selected silicate boards and solid wood. 100/120 mm diameters, 35 mm bore, 6 teeth, trimming thickness 40 mm or 15-60 mm options.

Product Description

Design and Construction

The PCD straight edge trimming cutter trims panel edges on compatible machines processing MDF, selected silicate boards and solid wood. The chart lists a 100 mm diameter (6 teeth, for 40 mm workpiece thickness) and 120 mm diameter options with 15-60 mm cutting thickness and 10-25 mm cutting width, all with a 35 mm bore.

How It Works

The cutter trims the panel edge in a straight pass: the diamond cutting edges shear the edge face while the listed bore matches the machine spindle. The trimming capacity is selected from the chart against the panel thickness.

Applications

Straight edge trimming
Panel sizing and trimming lines
Edge finishing on MDF and silicate boards
Trimming production runs

Suitable Materials

MDF
Selected silicate boards
Solid wood
Wood-based panels

Material Comparison: Tungsten Carbide vs. PCD (Diamond)

This tool is a PCD (polycrystalline diamond) cutter. Tungsten carbide is the conventional alternative. Typical industry data:

Property	Tungsten Carbide Cutter	PCD (Diamond) Cutter (This Tool)
Hardness	1,500-2,000 HV	7,000-9,000 HV
Best suited for	General profiling across mixed materials	Highly abrasive boards and long production runs
Tool life vs. carbide baseline	1x (baseline)	10-15x on abrasive panels (typical industry data)
Edge wear on MDF/particleboard	Wear visible within shorter runs	Minimal wear over extended runs
Toughness	Higher toughness; tolerates impacts better	Lower toughness; sensitive to impact and metal contamination
Regrinding	Can be reground	Not reground in the normal case
Initial cost	Lower	Higher
Cost per part at long runs	Usually higher	Usually lower on abrasive, long-run work
Typical choice	Short runs and mixed materials	This tool: long-run profiling on abrasive boards

Typical industry data; actual tool life varies with workpiece, machine and feeds.

Delivery Scope

1 x PCD Straight Edge Trimming Cutter (configuration per chart/drawing)
Individual box packaging

Why Choose VPOINT

One-year warranty on manufacturing defects
Custom and non-standard geometries supported against drawings
Regrinding service available for carbide components
Factory-direct since 2008, ISO 9001 certified
Manufacturing in Sichuan and Dongguan, China

Precision & Quality Control

Each cutter is inspected against the specification sheet before packing: bore and diameter tolerances, cutting geometry and balance are checked under the ISO 9001 quality system, with batch traceability on every order.

Specifications

＋The source specification lists the following confirmed configurations:

Outside diameter (mm)	Bore (mm)	Workpiece thickness (mm)	Teeth
100	35	40	6

＋120 mm diameter chart:

Outside diameter (mm)	Bore (mm)	Cutting thickness (mm)	Cutting width (mm)
120	35	15	10
120	35	20	10
120	35	30	15
120	35	40	20
120	35	50	20
120	35	60	25

Frequently Asked Questions

Which configurations are listed?

＋The chart lists a 100 mm diameter (6 teeth, 40 mm workpiece thickness) and 120 mm options with 15-60 mm cutting thickness and 10-25 mm cutting width.