How hard is the cutting material?

The carbide grade used in this premium tct straight router bit delivers ≈ 60–65 HRC (HSS) / 1,500–2,000 HV (solid carbide) hardness, which keeps the cutting edge sharp under continuous load.

Can you supply OEM or ODM parts, and how fast?

Yes. VPOINT TOOLS runs two factories in China (Chengdu and Dongguan) and accepts OEM and ODM orders. Standard samples and in-stock items ship within 24-48 hours; custom tooling is quoted per specification.

Which machines and materials is this premium tct straight router bit used for?

It is used on CNC routers, table saws and spindle moulders for cutting particle board, MDF, plywood, solid wood and aluminium composite panels. Chipbreaker or replaceable-insert models are available for high-volume production runs.

Do you ship worldwide?

Yes. VPOINT TOOLS ships carbide and PCD woodworking tooling to more than 100 countries. Tell us the destination and application and we will confirm freight cost and lead time.

Premium TCT Straight Router Bit

Tungsten-carbide-tipped straight router bits for compatible CNC machining centres and routers, listed for MDF, solid wood, particleboard, plywood and acrylic. Laser-etched insertion marks, a chamfered shank base and individual plastic-box packaging are part of the supplied product details.

Product Description

Premium TCT Straight Router Bit for Woodworking Production

Design and Construction

＋A tungsten-carbide cutting lip is brazed onto a steel body with a chamfered shank base for clean collet clamping; each tool carries laser-etched insertion marks for depth setting. ＋The original page lists no numerical dimension table — cutting diameters, cutting lengths and shank sizes are confirmed per order against the application. The series is produced in the Sichuan and Dongguan, China manufacturing bases.

How It Works

＋In the router or CNC spindle, the straight carbide lip ploughs a constant-width groove or dado at full depth or in steps. The chamfered shank base seats fully in the collet, and the etched marks give a repeatable depth reference without measuring each setup.

Applications

Straight routing, grooving and dado work on CNC machining centres and routers
MDF, solid wood, particleboard, plywood and acrylic processing

Suitable Materials

MDF, solid wood, particleboard, plywood and acrylic, subject to grade and application review
Suitability depends on the specific material grade, machine condition and machining parameters; confirm the application before ordering

Material Comparison: High-Speed Steel (HSS) Tool vs. Solid Carbide Tool

＋Typical industry data for reference. Actual results depend on the workpiece grade, machine condition and feed rate.

Property	High-Speed Steel (HSS) Tool	Solid Carbide Tool
Cutting edge hardness	≈ 60–65 HRC (HSS)	1,500–2,000 HV (solid carbide)
Heat resistance of the edge	Loses hardness above ≈ 315 °C	Retains hardness up to ≈ 1,000 °C
Edge life on abrasive panels	Baseline (1×)	5–10× longer edge life
Feed rate at equal quality	Lower	Higher
Sharpness retention on MDF / particleboard	Dulls quickly	Holds the edge through long runs
Regrinding cycles over tool life	Limited	More regrinds
Cut edge quality as the edge wears	More fuzzing and tearout	Consistent clean walls
Rigidity in long tools	Lower	Higher (solid carbide body)
Typical machines	Light-duty routers and drills	CNC machining centres, multi-spindle borers
Cost per hole / metre of cut	Higher over long runs	Lower over long runs

Delivery Scope

Each bit is packed in an individual plastic box.

＋Each order also includes an inspection record. Send the material and thickness, routing operation, cutting diameter and length, shank size and machine details so the configuration is confirmed before production.

Why Choose VPOINT

＋VPOINT supports this carbide tool series with:

One-year warranty on every tool
Custom diameters, shanks and rotations produced to order
Regrinding service to extend tool life
Factory direct since 2008, ISO 9001 certified
Dual manufacturing bases in Sichuan and Dongguan, China

Precision & Quality Control

＋Every straight router bit is inspected before shipment: cutting diameter, shank diameter and tool runout are checked against the specification table at micron level. Production follows an ISO 9001 process with batch traceability, so reorders match the original configuration.

Specifications

＋The original page specifies no numerical dimension table. The parameters below define a complete configuration request; every value is confirmed against the application before production.

＋	P	a	r	a	m	e	t	e	r
＋	T	o		c	o	n	f	i	r	m		w	i	t	h		t	h	e		o	r	d	e	r

＋	C	u	t	t	i	n	g		d	i	a	m	e	t	e	r
＋	P	e	r		a	p	p	l	i	c	a	t	i	o	n

＋	C	u	t	t	i	n	g		l	e	n	g	t	h
＋	P	e	r		a	p	p	l	i	c	a	t	i	o	n

＋	S	h	a	n	k		d	i	a	m	e	t	e	r
＋	P	e	r		c	o	l	l	e	t		s	i	z	e

＋	O	v	e	r	a	l	l		l	e	n	g	t	h
＋	P	e	r		a	p	p	l	i	c	a	t	i	o	n

Frequently Asked Questions

Are standard sizes available?

＋The original page lists no numerical dimension table — cutting diameter, cutting length and shank size are confirmed per order against the application.