How hard is the cutting material?

The carbide grade used in this diamond raising cutter for floor delivers 7,000–9,000 HV / 1,500–2,000 HV hardness, which keeps the cutting edge sharp under continuous load.

Can you supply OEM or ODM parts, and how fast?

Yes. VPOINT TOOLS runs two factories in China (Chengdu and Dongguan) and accepts OEM and ODM orders. Standard samples and in-stock items ship within 24-48 hours; custom tooling is quoted per specification.

Which machines and materials is this diamond raising cutter for floor used for?

It is used on CNC routers, table saws and spindle moulders for cutting particle board, MDF, plywood, solid wood and aluminium composite panels. Chipbreaker or replaceable-insert models are available for high-volume production runs.

Do you ship worldwide?

Yes. VPOINT TOOLS ships carbide and PCD woodworking tooling to more than 100 countries. Tell us the destination and application and we will confirm freight cost and lead time.

Diamond Raising Cutter For Floor

Diamond raising cutters for floor, D 160-250 mm, combined two-tier designs (7+5, 15/8 mm), Z up to 36+12. PCD cutterheads for two-stage flooring edges.

The VPOINT Diamond Raising Cutter For Floor is a carbide woodworking cutting tool. Ideal for two-stage edge forming on flooring lines, laminate flooring production and combined profile cutting in one pass.

Product Description

The VP0052 diamond raising cutter is a PCD-tipped profile cutterhead for flooring production in single and combined two-tier designs, running 160 to 250 mm diameters on 40 and 60 mm bores. Profiles are built to the flooring line’s requirement.

Design and Construction

The VP0052 diamond raising cutter is a PCD-tipped profile cutterhead for flooring production, in single and combined two-tier designs. Diameters (ØD) run 160 to 250 mm with bores (Ød) of 40 and 60 mm; cutting widths (B) run 7 to 20 mm, with combined designs such as 7+5 mm and 15/8 mm pairing two profile stages on one head; tooth counts run 12 to 36, with combined counts such as 24+12.

How It Works

Two-tier combined designs cut two profile stages in one pass — the upper tier forms the raised edge while the lower tier finishes the joint face. This halves the number of passes on the flooring line, and the PCD teeth hold both profile stages in abrasive board.

Applications

Two-stage edge forming on flooring lines
Laminate flooring production
Combined profile cutting in one pass
High-speed flooring lines

Suitable Materials

HDF flooring board
Melamine-faced boards
Engineered wood flooring
Veneered panels

The PCD profiles hold both stages of the combined geometry in abrasive board, keeping two-stage edges consistent.

Material Comparison: PCD vs. Tungsten Carbide

The figures below are typical industry data for production woodworking. PCD does not replace carbide in every job — carbide remains the right choice for low-volume general work — but on abrasive sheet goods the difference in blade life is decisive.

Property	PCD Diamond (This Blade)	Tungsten Carbide
Hardness	7,000–9,000 HV	1,500–2,000 HV
Tool life on MDF / particleboard / melamine	15–20× longer (500–1,200 h)	30–60 h (baseline)
Tool life on solid hardwood	10–13× longer (800–2,000 h)	80–150 h (baseline)
Tool life on abrasive boards (fibre cement / composites)	10–15× longer	baseline
Edge renewal	Limited regrinds — the economics come from 15–20× longer intervals between changes, not regrind count	4–6 regrinds at shorter intervals
Cut finish	Ra ≤ 0.2 μm achievable, stable over the blade life	Ra ~0.8 μm typical, degrades as teeth wear
Thermal conductivity	540–560 W/m·K — heat leaves the tooth tip fast	~80 W/m·K
Friction coefficient	≈ 0.05 — lower cutting forces and heat	≈ 0.3
Suited for	Abrasive engineered wood, laminates, composites, fibre cement, non-ferrous metals	General-purpose solid-wood work; the economic choice at lower volumes

Figures are typical published values; actual blade life depends on the workpiece material, feed rate, depth of cut, machine condition and maintenance schedule.

Delivery Scope

Single cutter. Order by part number with the diameter, bore, width and tooth count stated in the specifications table below.

Why Choose VPOINT

One-year warranty on every blade — defects in material or workmanship are covered for 12 months from delivery.
Custom tooling — diameters, kerfs, bores and tooth counts built to your drawing or sample.
Non-standard fabrication — sizes outside the standard catalogue, including bore re-sizing and tooth-count changes.
Resharpening service — blades return to service after regrinding at a fraction of new-blade cost.
Factory-direct since 2008 — ISO 9001 manufacturing in Sichuan and Dongguan, China; 40Cr chrome-molybdenum steel bodies; no trading intermediaries.

Send a drawing, a sample or a worn blade, and our engineering team will quote the exact specification you need.

Precision & Quality Control

Every blade is inspected before shipment. Outside diameter, kerf thickness, plate thickness, bore diameter and tooth count are measured against the values listed in the specifications table, and tooth geometry (hook angle, bevel angle) is verified against the design drawing. Blades are stress-checked for runout and tension before packing.

Blades measuring outside tolerance do not ship. Inspection is performed under our ISO 9001 quality system, with batch records retained for traceability.

Specifications

Part No.	ØD	Ød	B	Z
VP005201	160	40	20	16
VP005202	160	40	7+5	12+6
VP005203	180	40	7+5	12+8
VP005204	220	60	7	24
VP005205	250	60	15/8	24+12
VP005206	250	60	15/8	36+12

Frequently Asked Questions

What is the Diamond Raising Cutter For Floor used for?

The VP0052 diamond raising cutter is a PCD-tipped profile cutterhead for flooring production, in single and combined two-tier designs.

How do I choose the right size?

Refer to the specification table on this page: part numbers fix the cutting diameter, shank and cutting length. State the diameter, shank and cutting length you need when ordering.

Which materials does it suit?

Typical materials include HDF flooring board, Melamine-faced boards, Engineered wood flooring. Confirm the material grade and machining conditions for the specific tool before ordering.

Can I order a custom version?

Yes. Send the profile drawing or item code together with the workpiece material, machine model, cutting direction and quantity. Tools are produced to order, and each tool is packed in an individual plastic box.

Key words: raising cutter floor, combined profile cutterhead, two stage flooring cutter, PCD diamond cutter