- PCD Tools For Wood
- Replaceable Insert Router Bits
- CNC End Mill
- Cutter Head
- Woodworking Tools
- Industries Knives
- Carbide Burr
- Carbide Rotary Burr
- Tungsten Carbide Burr Bits
- Tungsten Carbide Burr Set
- Cylindrical Carbide Burr
- Long Shank Carbide Burr
- Double Cut Carbide Burr
- Flame Carbide Burr
- Cone Carbide Burr
- Burr Blanks
- Carbide Rods
- Tire Reamer Bit
- Tungsten Carbide End Mill
- Carbide Tire Studs
- Snow Tire Studs
- ATV Tire Studs
- Motorcycle Tire Studs
- Mining & Oiling
HW TCT Circular Saw Blade 300 X 3.2/2.2 X 30 X 96Z
HW TCT circular saw blade, Ø300 mm, kerf 3.2/2.2 mm, bore 30 mm, 96T. Fine-finish carbide panel saw blade.
The VPOINT HW TCT Circular Saw Blade 300 X 3.2/2.2 X 30 X 96Z is a carbide-tipped circular saw blade. Ideal for panel sizing on panel saws, laminate and melamine panel cutting and furniture panel production.
Design and Construction — a VPOINT woodworking cutting tool for panel sizing and crosscut work, sized for chipboard / particleboard and similar workpieces. The specification table below lists dimensions; the performance table gives standard reference values to start with, and the FAQ covers selection and service. ISO 9001 production, batch-verified, custom sizes from drawings.
Upgrade your saw to achieve precise cuts in woodworking and construction projects with the HW TCT circular saw blade. With a diameter of 300mm, and 96 teeth, this blade ensures improved performance and precision. Its 30mm bore makes it compatible with most saws, making it an ideal addition to your toolkit. Get yours now to experience the perfect combination of strength and accuracy in every cut.
Introducing the HW TCT Circular Saw Blade: Upgrade Your Saw and Achieve Precise Cuts in Woodworking and Construction Projects!
Saw Blades suitable for crosscutting
Size:300*3.2*2.2*30*96T.
Application: for fine cutting.
Machine:for table saws and cross cutting saws.
Cutting materials: chip board,MDF, Soft, hard and exotic solid wood, chipboard, thermoplastic-wood composites, MDF laminated on one side
There are different tooth shapes, such as ladder teeth, left and right teeth.ATB 15° tooth with positive cutting angle.
It is suitable for cutting high-grade double veneer density board, particleboard, joinery board and other plates with high requirements and no impurities
– The HW TCT Circular Saw Blade offers excellent value for its price, making it an affordable choice for both amateur and professional users.
– It’s a long-lasting and reliable tool that can save you time and money on frequent blade replacements.
Order yours now and experience the perfect combination of strength and accuracy in every cut. With the HW TCT Circular Saw Blade, you can easily upgrade your saw and achieve precise cuts in your woodworking and construction projects.
Design and Construction
The HW TCT circular saw blade carries tungsten carbide (tungsten carbide tipped) teeth on a laser-cut steel plate: 300 mm outside diameter, 3.2/2.2 mm kerf/plate thickness, 30 mm bore and 96 teeth per the product title.
How It Works
Carbide-tipped teeth are the production standard for panel sizing: 96 fine teeth shear laminated faces cleanly, and the tips can be reground several times. The 30 mm bore fits panel-saw arbors directly.
Applications
- Panel sizing on panel saws
- Laminate and melamine panel cutting
- Furniture panel production
- Fine-finish crosscutting
Suitable Materials
- Melamine-faced particleboard
- MDF and laminated boards
- Veneered plywood
- Solid wood panels
The 96-tooth carbide tip layout finishes laminated faces cleanly in panel sizing work.
Material Comparison: TCT Circular Saw Blade vs. PCD Circular Saw Blade
A 300 mm TCT blade with 96 teeth is a general-purpose wood blade. The choice against a PCD blade is not about which cuts better, but about how the blade is renewed and how long the cut runs.
| Property | TCT Saw Blade (This Tool) | PCD Saw Blade |
|---|---|---|
| Tooth material | Tungsten carbide teeth brazed onto a steel body (TCT) | Polycrystalline diamond teeth (PCD) |
| Tooth form | Variable tooth count (Z) gives a smooth, general-purpose cut | Fixed tooth count (T) is ground for one material and one kerf |
| Renewal | The blade can be reground several times, so the body stays in service | PCD cannot be sharpened; the worn blade is replaced |
| Cutting behaviour | Forgiving on mixed material stacks and on interrupted cuts | Runs at a higher feed and a higher load, which suits a stable, continuous cut |
| Material suitability | Softwood, board material, plastic and aluminium with the right tooth grade | Hard and abrasive material, and long production runs where the cost per cut decides |
| Cost per cut | Low purchase price and reground cost spread over many cuts | Higher purchase price, but no regrinding cycle and a very long life |
| Best suited for | General woodworking, panel cutting and aluminium work | High-volume production where the blade runs for weeks between changes |
For a workshop that changes material between softwood, board and aluminium, the TCT blade with its variable tooth count and regrindable body is the flexible and economical choice; a PCD blade pays off only when the same cut runs in high volume for weeks.
Delivery Scope
Single blade. Order by the diameter, kerf, bore and tooth count stated in the specifications table below.
Why Choose VPOINT
- One-year warranty on every cutter — defects in material or workmanship are covered for 12 months from delivery.
- Custom tooling — diameters, shanks, cutting lengths and flute configurations built to your drawing or sample.
- Non-standard fabrication — sizes outside the standard catalogue, including special geometries.
- Resharpening service — cutters return to service after regrinding at a fraction of new-tool cost.
- Factory-direct since 2008 — ISO 9001 manufacturing in Sichuan and Dongguan, China; no trading intermediaries.
Send a drawing, a sample or a worn tool, and our engineering team will quote the exact specification you need.
Precision & Quality Control
Every cutter is inspected before shipment. Shank diameter, cutting-edge diameter, cutting length and overall length are measured against the values listed in the specifications table, and cutting edge runout is verified on the assembled tool.
Tools measuring outside tolerance do not ship. Inspection is performed under our ISO 9001 quality system, with batch records retained for traceability.
Key words: TCT circular saw blade, 300mm panel saw blade, 96T carbide blade, panel sizing blade, saw blade, panel saw blade, scoring saw blade, circular saw blade, carbide saw tips, TCT saw blade, reversible knives, rota-tip bit, constant cutting diameter, rotate insert 90 degrees, double the cutting life, on-machine knife change, ER collet, 1/2-inch shank insert bit, furniture manufacturing, furniture factory, cabinet making, panel furniture, kitchen cabinet production, woodworking machinery, CNC router, woodworking cutting tools, acrylic sheet, solid wood, particleboard, chipboard, plywood, rubber sheet, rubber board, hardwood, softwood, MDF, HDF, melamine board, flycutter, planing bit, surfacing bit, slab flattening bit, bottom cleaning bit, spoilboard leveller, rabbeting bit
Performance Data
Standard reference values for guidance only — always adjust to machine rigidity, clamping and tool wear, and confirm on the actual workpiece.
| Material | Typical spindle speed | Typical feed | Notes |
|---|---|---|---|
| chipboard / particleboard | 4,500–6,000 rpm | 10–18 m/min | TCT teeth resist abrasive glue |
| MDF / HDF | 5,000–6,500 rpm | 9–16 m/min | Smooth kerf, minimal fuzzing |
| melamine-faced panels | 4,500–5,500 rpm | 8–14 m/min | Score first to prevent face chipping |
| solid wood | 4,800–6,000 rpm | 10–15 m/min | Alternating grain demands sharp teeth |
Frequently Asked Questions
How do I choose the tooth count?
More teeth give a cleaner edge on thin or faced panels; fewer teeth clear chips faster on thick stock.
What arbor speed suits this blade?
Set by diameter and tooth count — larger diameters run slower; start near 4,500–6,000 rpm for panel work.
How often should the blade be serviced?
At the first burn marks or heavy feed resistance; a sharpened tooth costs less than a rejected panel.
Sources & standards: ISO 9001 quality management · UNSPSC commodity codes · eClass product classification
Related Search Terms
PCD saw blade, diamond saw blade, panel sizing saw blade, PCD scoring blade, diamond tip circular saw, circular, blade
\n\n
