- PCD Tools For Wood
- Replaceable Insert Router Bits
- CNC End Mill
- Cutter Head
- Woodworking Tools
- Industries Knives
- Carbide Burr
- Carbide Rotary Burr
- Tungsten Carbide Burr Bits
- Tungsten Carbide Burr Set
- Cylindrical Carbide Burr
- Long Shank Carbide Burr
- Double Cut Carbide Burr
- Flame Carbide Burr
- Cone Carbide Burr
- Burr Blanks
- Carbide Rods
- Tire Reamer Bit
- Tungsten Carbide Particles
- Carbide Composite Rods
- Tungsten Carbide End Mill
- Carbide Tire Studs
- Snow Tire Studs
- ATV Tire Studs
- Motorcycle Tire Studs
- Mining & Oiling
CNC Woodworking Tenon Cutter
CNC woodworking tenon cutter made to order for CNC tenoning stations. Diameter, bore and width matched to your machine.
The VPOINT CNC Woodworking Tenon Cutter is a tenoning cutter head. Ideal for CNC tenoning stations, door and window joinery and frame and sash manufacturing.
Design and Construction
The CNC woodworking tenon cutter is a cutterhead for CNC tenoning stations. Head diameter, bore, cutting width and insert/blade configuration are matched to the tenoning operation when ordering; the head carries carbide cutting elements for abrasive boards.
How It Works
The head mills the tenon shoulder and cheeks in one pass as the rail feeds past. When the edges dull, the cutting elements are indexed or replaced and the head stays mounted — tenon dimensions stay stable across the run.
Applications
- CNC tenoning stations
- Door and window joinery
- Frame and sash manufacturing
- Furniture rail and stile tenoning
Suitable Materials
- Solid wood
- MDF and particleboard
- Plywood and veneered panels
- Laminated boards
Carbide cutting elements hold tenon dimensions in abrasive board across long runs.
System Comparison: Replaceable Insert vs. Solid Knife
Insert cutterheads keep the steel body in service and replace only the cutting edges. For production planing and jointing, this is usually the lower-cost way to hold edge quality.
| Property | Replaceable Insert Knife (This Tool) | Solid Profile Knife |
|---|---|---|
| Edge replacement | Swap the worn insert only; the steel body stays in service | Regrind or replace the complete tool |
| Body material | 40Cr chrome-molybdenum steel body, reused across insert changes | Whole tool consumed as the edge wears |
| Downtime per edge change | Minutes — index or swap the insert | Send out for regrinding or buy a new tool |
| Profile changes | Fit a different insert geometry to the same body | New tool required per profile |
| Edge condition | Fresh edge on every change; consistent cut quality | Edge quality drifts between regrinds |
| Best suited for | Production cutterheads with repeat profiles | One-off profiles and low-volume work |
Solid knives remain the better choice for one-off profiles and very low volumes.
Delivery Scope
Single cutterhead. Order by the diameter, width, bore and tooth count stated in the specifications table below (inserts sold separately).
Why Choose VPOINT
- One-year warranty on every cutter — defects in material or workmanship are covered for 12 months from delivery.
- Custom tooling — diameters, shanks, cutting lengths and flute configurations built to your drawing or sample.
- Non-standard fabrication — sizes outside the standard catalogue, including special geometries.
- Resharpening service — cutters return to service after regrinding at a fraction of new-tool cost.
- Factory-direct since 2008 — ISO 9001 manufacturing in Sichuan and Dongguan, China; no trading intermediaries.
Send a drawing, a sample or a worn tool, and our engineering team will quote the exact specification you need.
Precision & Quality Control
Every cutter is inspected before shipment. Shank diameter, cutting-edge diameter, cutting length and overall length are measured against the values listed in the specifications table, and cutting edge runout is verified on the assembled tool.
Tools measuring outside tolerance do not ship. Inspection is performed under our ISO 9001 quality system, with batch records retained for traceability.
Specifications
| Parameter | How to specify |
|---|---|
| Outside diameter (ØD) | State the blade diameter, or your machine model |
| Kerf / plate thickness | State both thicknesses, or send the old blade as a sample |
| Bore (Ød) | State the spindle bore; bore-reduction rings available |
| Tooth count (Z) and tooth type | State the tooth count; tooth geometry is matched to the material |
| Custom sizes | Send a drawing or sample — built to order |
Key words: CNC tenon cutter, woodworking tenon cutterhead, tenoning head, CNC tenon tool
