Diamond Proformance Router

The company uses high-end production and testing equipment from Germany, selects international high-quality raw materials, and provides customers with professional supporting production tools and related accessories. The products include saw blades, forming knives, handle milling cutters, drill bits, and various diamond tools.

The VPOINT Diamond Proformance Router is an insert-knife router bit for CNC routers. Built for CNC routers in daily production. Consistent geometry and sharp carbide keep cuts clean across the full size range.

Product Description

Design and Construction — a VPOINT router bit tool for CNC routing and nesting, sized for melamine-faced board and similar workpieces. The specification table below lists dimensions; the performance data table gives standard reference speeds and feeds to start with, and the FAQ covers selection, parameters and service. ISO 9001 production, batch-verified, custom sizes from drawings.

The VP0011 performance router series runs a 3+3 compression spiral — three up-cut flutes above three down-cut flutes — with cutting diameters from 12 to 20 mm and shanks matched to the spindle, as listed in the specifications table. The solid PCD edges keep both panel faces clean in single-pass nesting.

Design and Construction

The VP0011 performance router carries solid polycrystalline diamond cutting edges on a 40Cr chrome-molybdenum steel body in a 3+3 compression layout. Part numbers cover 12 to 20 mm diameters with cutting lengths from 22 to 45 mm on 10 to 20 mm shanks.

How It Works

Three up-cut flutes shear the bottom face while three down-cut flutes hold the top face, so a single pass leaves both surfaces clean. The PCD edges keep flute geometry stable in abrasive faced board across long nesting runs.

Applications

Panel sizing and nesting on CNC routers
Edge trimming on machining centres
Grooving in laminated panels
Furniture parts machining

Suitable Materials

Melamine-faced particleboard
MDF and laminated boards
Veneered plywood
Solid wood

The PCD edges hold diameter and flute geometry through long runs in abrasive sheet goods.

Material Comparison: PCD vs. Tungsten Carbide

The figures below are typical industry data for production woodworking. PCD does not replace carbide in every job — carbide remains the right choice for low-volume general work — but on abrasive sheet goods the difference in blade life is decisive.

Property	PCD Diamond (This Blade)	Tungsten Carbide
Hardness	7,000–9,000 HV	1,500–2,000 HV
Tool life on MDF / particleboard / melamine	15–20× longer (500–1,200 h)	30–60 h (baseline)
Tool life on solid hardwood	10–13× longer (800–2,000 h)	80–150 h (baseline)
Tool life on abrasive boards (fibre cement / composites)	10–15× longer	baseline
Edge renewal	Limited regrinds — the economics come from 15–20× longer intervals between changes, not regrind count	4–6 regrinds at shorter intervals
Cut finish	Ra ≤ 0.2 μm achievable, stable over the blade life	Ra ~0.8 μm typical, degrades as teeth wear
Thermal conductivity	540–560 W/m·K — heat leaves the tooth tip fast	~80 W/m·K
Friction coefficient	≈ 0.05 — lower cutting forces and heat	≈ 0.3
Suited for	Abrasive engineered wood, laminates, composites, fibre cement, non-ferrous metals	General-purpose solid-wood work; the economic choice at lower volumes

Figures are typical published values; actual blade life depends on the workpiece material, feed rate, depth of cut, machine condition and maintenance schedule.

Delivery Scope

Single blade. Order by part number with the diameter, bore, width and tooth count stated in the specifications table below.

Why Choose VPOINT

One-year warranty on every blade — defects in material or workmanship are covered for 12 months from delivery.
Custom tooling — diameters, kerfs, bores and tooth counts built to your drawing or sample.
Non-standard fabrication — sizes outside the standard catalogue, including bore re-sizing and tooth-count changes.
Resharpening service — blades return to service after regrinding at a fraction of new-blade cost.
Factory-direct since 2008 — ISO 9001 manufacturing in Sichuan and Dongguan, China; 40Cr chrome-molybdenum steel bodies; no trading intermediaries.

Send a drawing, a sample or a worn blade, and our engineering team will quote the exact specification you need.

Precision & Quality Control

Every blade is inspected before shipment. Outside diameter, kerf thickness, plate thickness, bore diameter and tooth count are measured against the values listed in the specifications table, and tooth geometry (hook angle, bevel angle) is verified against the design drawing. Blades are stress-checked for runout and tension before packing.

Blades measuring outside tolerance do not ship. Inspection is performed under our ISO 9001 quality system, with batch records retained for traceability.

Specifications

Part No.	ØD	Ød	L1	L	Z
St0011 D10 H22	12	10	22	70	3+3
VP0011 D12 H25	12	12	25	75	3+3
VP0011 D12 H28	12	12	28	75	3+3
VP0011 D12 H32	12	12	32	85	3+3
VP0011 D12 H32	12	12	41	90	3+3
VP0011 D16 H25	16	16	25	90	3+3
VP0011 D16 H30	16	16	30	95	3+3
VP0011 D16 H35	16	16	35	95	3+3
VP0011 D16 H38	16	16	38	100	3+3
VP0011 D16 H45	16	16	45	100	3+3
VP0011 D20 H28	20	20	28	90	3+3
VP0011 D20 H35	20	20	35	95	3+3
VP0011 D20 H45	20	20	45	105	3+3
VP0011 D18 H22 S25	25	18	22	100	3+3
VP0011 D20H28 S25	25	20	28	107	3+3
VP0011 D25 H28	25	25	28	115	3+3
VP0011 D25 H35	25	25	35	105	3+3
VP0011 D25 H42	25	25	42	125	3+3
VP0011 D25 H48	25	25	48	125	3+3
VP0011 D25 H55	25	25	55	120	3+3
VP0011 D25 H60	25	25	60	130	3+3

Performance Data

Standard reference values for guidance only — always adjust to machine rigidity, clamping and tool wear, and confirm on the actual workpiece.

Material	Typical spindle speed	Typical feed	Notes
melamine-faced board	18,000–22,000 rpm	8–12 m/min	Chipping-free double faces in one pass
particleboard	18,000–22,000 rpm	8–12 m/min	Watch grit content; PCD resists abrasion
plywood	18,000–22,000 rpm	8–12 m/min	Clean edges on abrasive glue lines
laminated panel	18,000–20,000 rpm	8–10 m/min	Double-sided laminates cut clean both faces

Frequently Asked Questions

What is the Diamond Proformance Router used for?

The VP0011 performance router carries solid polycrystalline diamond cutting edges on a 40Cr chrome-molybdenum steel body in a 3+3 compression layout.

How do I choose the right size?

Refer to the specification table on this page: part numbers fix the cutting diameter, shank and cutting length. State the diameter, shank and cutting length you need when ordering.

Which materials does it suit?

Typical materials include Melamine-faced particleboard, MDF and laminated boards, Veneered plywood. Confirm the material grade and machining conditions for the specific tool before ordering.

Can I order a custom version?

Yes. Send the profile drawing or item code together with the workpiece material, machine model, cutting direction and quantity. Tools are produced to order, and each tool is packed in an individual plastic box.

Key words: PCD performance router, 3+3 compression router bit, diamond nesting router bit, CNC spiral router bit, PCD router bit, PCD spiral router bit, diamond router bit, PCD tips, diamond compression end mill, PCD shank cutter, PCD helicoidal cutter, PCD vs brazed tungsten carbide, diamond cutting tool for MDF, PCD tooling for chipboard, polycrystalline diamond router bit, furniture manufacturing, furniture factory, cabinet making, panel furniture, kitchen cabinet production, woodworking machinery, CNC router, woodworking cutting tools, woodworking, what is the difference between TCT and solid carbide, insert vs brazed router bit, acrylic sheet, solid wood, particleboard, chipboard, plywood, rubber sheet, rubber board, hardwood, softwood, MDF, HDF, melamine board, flycutter, planing bit, surfacing bit, slab flattening bit, bottom cleaning bit, spoilboard leveller, rabbeting bit

What feed rate should I start with on melamine-faced board?

Begin near 8–12 m/min at 18,000–22,000 rpm, then tune by chip load and edge finish. PCD holds its edge far longer than carbide on abrasive boards, so the parameters stay stable across long runs.

How does PCD tool life compare with brazed tungsten carbide here?

On abrasive sheet goods PCD typically lasts 15–20 times longer than brazed carbide (industry-typical figures). Fewer tool changes mean steadier nesting quality.

Can a worn PCD edge be resharpened?

Yes — we offer a resharpening service, and many edges can be rotated to a fresh section first. Send the tool in with a note on the material you cut.

Sources & standards: ISO 9001 quality management · UNSPSC commodity codes · eClass product classification

Related Search Terms

solid carbide end mill, CNC end mill, compression router bit, upcut spiral bit, downcut spiral bit, single flute end mill, two flute end mill, spiral flutes end mill, slotting end mill, profiling end mill, steel slotting cutter, aluminium end mill, acrylic end mill, nano coating end mill, corn milling cutter