How hard is the cutting material?

The carbide grade used in this pcd v groove bit delivers 7,000–9,000 HV / 1,500–2,000 HV hardness, which keeps the cutting edge sharp under continuous load.

Can you supply OEM or ODM parts, and how fast?

Yes. VPOINT TOOLS runs two factories in China (Chengdu and Dongguan) and accepts OEM and ODM orders. Standard samples and in-stock items ship within 24-48 hours; custom tooling is quoted per specification.

Which machines and materials is this pcd v groove bit used for?

It is used on CNC routers, table saws and spindle moulders for cutting particle board, MDF, plywood, solid wood and aluminium composite panels. Chipbreaker or replaceable-insert models are available for high-volume production runs.

Do you ship worldwide?

Yes. VPOINT TOOLS ships carbide and PCD woodworking tooling to more than 100 countries. Tell us the destination and application and we will confirm freight cost and lead time.

What is the PCD V Groove Bit used for?

It cuts V-grooves in panels, lettering, sign making and joint profiles on CNC routers, engraving machines and routing machines.

Which included angles and sizes are available?

Two included angles — 90° and 120° — across 14 part numbers, with cutting diameters from 10 to 20 mm on 12.7 mm shanks; see the specification table for each item code.

Which materials does it suit?

Hardwood, softwood, plywood and composite workpieces. Confirm the material grade and machining conditions for the specific tool before ordering.

Can I order a custom angle or size?

Yes. Send the profile drawing, tool dimensions, workpiece material, machine model and quantity, and the cutter will be produced to order against the confirmed specification.

What is the PCD V Groove Bit used for?

It cuts V-grooves in panels, lettering, sign making and joint profiles on CNC routers, engraving machines and routing machines.

Which included angles and sizes are available?

Two included angles — 90° and 120° — across 14 part numbers, with cutting diameters from 10 to 20 mm on 12.7 mm shanks; see the specification table for each item code.

Which materials does it suit?

Hardwood, softwood, plywood and composite workpieces. Confirm the material grade and machining conditions for the specific tool before ordering.

Can I order a custom angle or size?

Yes. Send the profile drawing, tool dimensions, workpiece material, machine model and quantity, and the cutter will be produced to order against the confirmed specification.

PCD V Groove Bit

Product Description

PCD V Groove Bit for CNC Woodworking

VPOINT offers PCD V Groove Bit for V-grooves in panels, lettering, sign making and joint profiles. This page brings together the original product information, available size references and the details needed for a tooling enquiry.

Applications and material selection

Typical operation: V-grooves in panels, lettering, sign making and joint profiles.

Materials listed for this product include hardwood, softwood, plywood and composite workpieces. Suitability depends on the specific material grade, profile and machining conditions; confirm the application before ordering.

Machine compatibility and profile selection

For compatible CNC woodworking machines, engraving machines and routing machines. Confirm the spindle or collet interface, cutting direction, machine clearance and workpiece setup for the selected tool.

Compare the 90° and 120° configurations below. Specify the required included angle, groove width and depth; an angle alone does not define the finished groove.

Material Comparison: PCD vs. Tungsten Carbide

The figures below are typical industry data for production woodworking. PCD does not replace carbide in every job — carbide remains the right choice for low-volume general work — but on abrasive sheet goods the difference in blade life is decisive.

Property	PCD Diamond (This Blade)	Tungsten Carbide
Hardness	7,000–9,000 HV	1,500–2,000 HV
Tool life on MDF / particleboard / melamine	15–20× longer (500–1,200 h)	30–60 h (baseline)
Tool life on solid hardwood	10–13× longer (800–2,000 h)	80–150 h (baseline)
Tool life on abrasive boards (fibre cement / composites)	10–15× longer	baseline
Edge renewal	Limited regrinds — the economics come from 15–20× longer intervals between changes, not regrind count	4–6 regrinds at shorter intervals
Cut finish	Ra ≤ 0.2 μm achievable, stable over the blade life	Ra ~0.8 μm typical, degrades as teeth wear
Thermal conductivity	540–560 W/m·K — heat leaves the tooth tip fast	~80 W/m·K
Friction coefficient	≈ 0.05 — lower cutting forces and heat	≈ 0.3
Suited for	Abrasive engineered wood, laminates, composites, fibre cement, non-ferrous metals	General-purpose solid-wood work; the economic choice at lower volumes

Figures are typical published values; actual blade life depends on the workpiece material, feed rate, depth of cut, machine condition and maintenance schedule.

Available size references

The table below is transcribed from the original product chart. D denotes cutting diameter, H cutting height, d shank diameter, L overall length, R radius and Z tooth layout where shown. Inch reference sizes retain the source notation. Confirm the final drawing and configuration before ordering.

PCD V Groove Bit specifications
Item code	D (mm)	H (mm)	V angle	d (mm)	L (mm)	Z
VP40001	10	9	90°	12.7	60	2
VP40002	12.7	10.35	90°	12.7	60	2
VP40003	15.9	13.95	90°	12.7	60	2
VP40004	25.4	17.7	90°	12.7	60	2
VP40005	30	20	90°	12.7	60	2
VP40006	35	22.5	90°	12.7	65	2
VP40007	40	25	90°	12.7	65	2
VP40008	50	30	90°	12.7	75	2
VP41001	12.7	8.65	120°	12.7	60.42	2
VP41002	15.9	9.59	120°	12.7	54.59	2
VP41003	25.4	12.33	120°	12.7	57.33	2
VP41004	35	15.1	120°	12.7	60.1	2
VP41005	40	16.55	120°	12.7	61.55	2
VP41006	50	19.43	120°	12.7	64.43	2

Original profile illustrations and specification charts

Custom tooling and quotation

Send the item code or required profile drawing, tool dimensions, workpiece material, machine model, cutting direction and quantity. A reference photo or current-tool drawing helps us review a custom request. Confirm the final specification and availability before ordering.

Each tool is packed in an individual plastic box.

Compare more PCD router bits or send your requirements to VPOINT.