How hard is the cutting material?

The carbide grade used in this pcd saw blade for particleboard delivers 1,500–2,000 HV / 7,000–9,000 HV hardness, which keeps the cutting edge sharp under continuous load.

Can you supply OEM or ODM parts, and how fast?

Yes. VPOINT TOOLS runs two factories in China (Chengdu and Dongguan) and accepts OEM and ODM orders. Standard samples and in-stock items ship within 24-48 hours; custom tooling is quoted per specification.

Which machines and materials is this pcd saw blade for particleboard used for?

It is used on CNC routers, table saws and spindle moulders for cutting particle board, MDF, plywood, solid wood and aluminium composite panels. Chipbreaker or replaceable-insert models are available for high-volume production runs.

Do you ship worldwide?

Yes. VPOINT TOOLS ships carbide and PCD woodworking tooling to more than 100 countries. Tell us the destination and application and we will confirm freight cost and lead time.

PCD Saw Blade for Particleboard

This PCD saw blade is intended for particleboard and other wood-based panels used in furniture manufacturing. The application list also covers MDF, double-faced panels and composite boards, where the diamond edge holds its sharpness through long production runs.

Product Description

PCD Saw Blade for Particleboard for Panel and Wood Processing

Design and Construction

＋Polycrystalline diamond (PCD) teeth are brazed into a precision-tensioned steel plate. Model series PSB01001–PSB01030 cover diameters from φ350 to φ450 mm, kerfs from 3.50 to 4.80 mm, bores from 25.4 to 80 mm and tooth counts from 72 to 96. The series is produced in the Sichuan and Dongguan, China manufacturing bases.

How It Works

＋Mounted on the panel-sizing saw, the diamond teeth shear chipping-prone board surfaces at high feed without the rapid edge wear that dulls carbide teeth. The edge stays sharp far longer, so cut quality and sizing accuracy remain stable across shifts, and the blade spends less time out of the machine for sharpening.

Applications

Sizing and cutting particleboard and other wood-based panels in furniture manufacturing
MDF, double-faced (melamine-faced) panels and composite boards

Suitable Materials

Particleboard and other wood-based panels, MDF, double-faced panels and composite boards, subject to grade and application review
Suitability depends on the specific material grade, machine condition and machining parameters; confirm the application before ordering

Material Comparison: Traditional Carbide-Tipped Saw Blade vs. Diamond (PCD) Saw Blade

＋Typical industry data for reference. Actual results depend on the workpiece grade, machine condition and feed rate.

Property	Traditional Carbide-Tipped Saw Blade	Diamond (PCD) Saw Blade
Cutting material hardness	1,500–2,000 HV	7,000–9,000 HV
Edge life on MDF / particleboard	Baseline (1×)	15–20× longer edge life
Edge life on solid wood	Baseline (1×)	10–13× longer edge life
Edge life on laminate / compact board	Baseline (1×)	10–15× longer edge life
Sharpening cycles	2–4 times	5–8 times
Cut edge quality	Ra 0.4–0.8 µm, more fuzzing	Ra 0.2–0.4 µm, cleaner edge
Thermal conductivity	≈ 100 W/m·K	≈ 500 W/m·K, heat cleared faster
Friction coefficient	≈ 0.3	≈ 0.05–0.1, lower cutting force
Chipping risk on brittle boards	Higher at high feed	Lower, stable edge at high feed
Cost per metre of cutting	Higher over long runs	Lower over long runs

Delivery Scope

Model references PSB01001, PSB01010, PSB01014, PSB01019 and PSB01025 are listed for this blade; further codes in the PSB01 series are produced to order.

＋Each order also includes an inspection record. Send the panel material and coating, saw make and model, required diameter, bore, kerf and tooth count so the configuration is confirmed before production.

Why Choose VPOINT

＋VPOINT supports this saw blade series with:

One-year warranty on every saw blade
Custom diameters, kerfs, bores and tooth counts produced to order
Regrinding service to extend blade life
Factory direct since 2008, ISO 9001 certified
Dual manufacturing bases in Sichuan and Dongguan, China

Precision & Quality Control

＋Every particleboard saw blade is inspected before shipment: diameter, bore, kerf, plate flatness and tooth geometry are checked against the specification table at micron level. Production follows an ISO 9001 process with batch traceability, so reorders match the original configuration.

Specifications

The table below reproduces the model references listed on the original chart; the full dimensional chart follows. D is blade diameter, B kerf width, d bore and Z tooth count, in millimetres.

Series	Model references
金刚石切刨花板专用锯片 (PCD saw blade for particleboard)	PSB01001, PSB01010, PSB01014, PSB01019, PSB01025

Original specification chart, PSB01001–PSB01030 (D φ350–450, B 3.50–4.80, d 25.4–80, Z 72–96)

Frequently Asked Questions

Which model codes are available?

＋Model codes PSB01001 through PSB01030 cover diameters from 350 to 450 mm, kerfs from 3.50 to 4.80 mm, bores from 25.4 to 80 mm and tooth counts from 72 to 96, as shown in the specification chart.

How do I choose the right specification?

＋Send the panel material and coating, saw make and model, required blade diameter, bore, kerf and tooth count. Model references alone do not confirm machine compatibility, so include the current blade marking where possible.

Can it cut melamine-faced panels?

＋Yes. Double-faced (melamine-faced) panels are listed for this blade; the PCD edge is specifically suited to abrasive faced boards that dull carbide quickly.

What should I send for a quotation?

＋Panel construction and thickness, blade diameter, bore, kerf and tooth count, the saw model and a current-tool photo or dimensioned drawing where available.

＋Key words: PCD saw blade for particleboard, diamond panel sizing blade, PCD circular saw blade, wood-based panel saw blade