Carbide Through-Hole Boring Bit for Woodworking Production — a VPOINT woodworking cutting tool for cabinet and furniture drilling, sized for softwood plywood and similar workpieces. The specification table below lists dimensions; the performance table gives standard reference values to start with, and the FAQ covers selection and service. ISO 9001 production, batch-verified, custom sizes from drawings.

Carbide Through-Hole Boring Bit for Woodworking Production

This pointed through-hole boring bit combines carbide cutting material with a high-speed steel shank. The spiral body provides a clear chip path during through-hole drilling, and two series cover diameters from 5 to 15 mm in right- and left-hand rotation.

Design and Construction

＋A carbide brad-point head is brazed onto a spiral HSS shank. The Professional series lists cutting diameters 5, 6, 7, 8, 9, 10, 12 and 15 mm (10 mm shank, 70 mm overall, 20/27 mm shank length); the Technology series lists 5, 6, 7, 8, 9, 10 and 12 mm (10 mm shank, 70 mm overall, 20 mm shank length). Black denotes right-hand clockwise rotation; red/orange denotes left-hand counterclockwise. The series is produced in the Sichuan and Dongguan, China manufacturing bases.

How It Works

＋The brad point centres the bit before the carbide edges cut, and the spiral flutes evacuate chips as the bit breaks through the panel. On multi-spindle borers the rotation direction is matched to the spindle so pairs of bits can drill mirrored holes in the same cycle.

Applications

• Through-hole drilling on multi-spindle boring machines and six-sided drilling machines
• System holes, dowel holes and through-holes in cabinet panels

Suitable Materials

• Particleboard, MDF, plywood and solid-wood panels, subject to grade and application review
• Suitability depends on the specific material grade, machine condition and machining parameters; confirm the application before ordering

Material Comparison: High-Speed Steel (HSS) Tool vs. Solid Carbide Tool

＋Typical industry data for reference. Actual results depend on the workpiece grade, machine condition and feed rate.

Delivery Scope

Select the series, bore diameter and rotation. Black denotes right-hand clockwise; red/orange denotes left-hand counterclockwise in the listed range.

＋Each order also includes an inspection record. Send the machine orientation, panel material, required diameter and shank length so the configuration is confirmed before production.

Why Choose VPOINT

＋VPOINT supports this carbide tool series with:

• One-year warranty on every tool
• Custom diameters, shanks and rotations produced to order
• Regrinding service to extend tool life
• Factory direct since 2008, ISO 9001 certified
• Dual manufacturing bases in Sichuan and Dongguan, China

Precision & Quality Control

＋Every through-hole boring bit is inspected before shipment: cutting diameter, shank diameter and tool runout are checked against the specification table at micron level. Production follows an ISO 9001 process with batch traceability, so reorders match the original configuration.

Specifications

The table below reproduces the original specification chart. Dimensions are in millimetres.

Performance Data

Standard reference values for guidance only — always adjust to machine rigidity, clamping and tool wear, and confirm on the actual workpiece.

Frequently Asked Questions

Which speed should I start with in hardwood?

＋Start near 10,000–14,000 rpm and peck when chips pack; the entry tears if you push the feed.

Do I need a pilot or pre-drill with this bit?

＋On laminated and dense boards a light pilot keeps the point from wandering; on soft stock it drills straight from the mark.

What feed keeps holes clean?

＋A steady moderate feed with clear chip ejection; back off if the entry tears or the flute loads.

Which diameters are covered?

＋The Professional series covers 5, 6, 7, 8, 9, 10, 12 and 15 mm; the Technology series covers 5, 6, 7, 8, 9, 10 and 12 mm, both on 10 mm shanks with 70 mm overall length.

What do the colours mean?

＋Black bits rotate right-hand (clockwise); red/orange bits rotate left-hand (counterclockwise). Confirm the required version for the spindle before ordering.

Why a spiral shank?

＋The spiral body provides the chip path for through-hole drilling, clearing chips as the bit exits the panel.

What should I send for a quotation?

＋The series, bore diameter and rotation, machine orientation and shank length, plus a current-tool photo or dimensioned drawing where available.

＋Key words: carbide through hole boring bit, brad point drilling bit, dowel hole boring bit, multi spindle boring bit, wood drill bit, boring bit, dowel drill, flute drill bit, through hole drilling wood, blind hole drilling, brad point drill, cabinet hinge drill, reversible knives, rota-tip bit, constant cutting diameter, rotate insert 90 degrees, double the cutting life, on-machine knife change, ER collet, 1/2-inch shank insert bit, furniture manufacturing, furniture factory, cabinet making, panel furniture, kitchen cabinet production, woodworking machinery, acrylic sheet, solid wood, particleboard, chipboard, plywood, rubber sheet, rubber board, hardwood, softwood, MDF, HDF, melamine board, flycutter, planing bit, surfacing bit, slab flattening bit, bottom cleaning bit, spoilboard leveller, rabbeting bit

Sources & standards: ISO 9001 quality management · UNSPSC commodity codes · eClass product classification

Related Search Terms

solid carbide end mill, CNC end mill, compression router bit, upcut spiral bit, downcut spiral bit, single flute end mill, two flute end mill, spiral flutes end mill, slotting end mill, profiling end mill, steel slotting cutter, aluminium end mill, acrylic end mill, nano coating end mill, corn milling cutter