How hard is the cutting material?

The carbide grade used in this pcd saw blade for compact laminate and composite boards delivers 1,500–2,000 HV / 7,000–9,000 HV hardness, which keeps the cutting edge sharp under continuous load.

Can you supply OEM or ODM parts, and how fast?

Yes. VPOINT TOOLS runs two factories in China (Chengdu and Dongguan) and accepts OEM and ODM orders. Standard samples and in-stock items ship within 24-48 hours; custom tooling is quoted per specification.

Which machines and materials is this pcd saw blade for compact laminate and composite boards used for?

It is used on CNC routers, table saws and spindle moulders for cutting particle board, MDF, plywood, solid wood and aluminium composite panels. Chipbreaker or replaceable-insert models are available for high-volume production runs.

Do you ship worldwide?

Yes. VPOINT TOOLS ships carbide and PCD woodworking tooling to more than 100 countries. Tell us the destination and application and we will confirm freight cost and lead time.

PCD Saw Blade for Compact Laminate and Composite Boards

This PCD saw blade family is identified for compact laminate, calcium-carbonate board and phenolic laminated board applications. These dense, abrasive boards destroy carbide edges quickly; the diamond edge is the reason this range holds its sharpness on them.

Product Description

PCD Saw Blade for Compact Laminate and Composite Boards for Panel and Wood Processing

Design and Construction

＋Polycrystalline diamond (PCD) teeth are brazed into a steel plate with tooth counts up to 96 for fine finishes on hard boards. The chart lists diameters from 250 to 450 mm, cutting widths from 3.0 to 4.8 mm, bores from 25.4 to 75 mm and tooth counts from 48 to 96. The series is produced in the Sichuan and Dongguan, China manufacturing bases.

How It Works

＋On the beam saw or panel saw, the diamond teeth grind and shear the dense laminate with minimal edge wear. Chipping on the board face stays low and the blade survives many times the metreage of a carbide blade on the same material.

Applications

Cutting compact laminate (HPL compact) boards
Calcium-carbonate board and phenolic laminated board applications

Suitable Materials

Compact laminate, calcium-carbonate board and phenolic laminated board, subject to grade and application review
Suitability depends on the specific board grade, surface finish and machining parameters; confirm the application before ordering

Material Comparison: Traditional Carbide-Tipped Saw Blade vs. Diamond (PCD) Saw Blade

＋Typical industry data for reference. Actual results depend on the workpiece grade, machine condition and feed rate.

Property	Traditional Carbide-Tipped Saw Blade	Diamond (PCD) Saw Blade
Cutting material hardness	1,500–2,000 HV	7,000–9,000 HV
Edge life on MDF / particleboard	Baseline (1×)	15–20× longer edge life
Edge life on solid wood	Baseline (1×)	10–13× longer edge life
Edge life on laminate / compact board	Baseline (1×)	10–15× longer edge life
Sharpening cycles	2–4 times	5–8 times
Cut edge quality	Ra 0.4–0.8 µm, more fuzzing	Ra 0.2–0.4 µm, cleaner edge
Thermal conductivity	≈ 100 W/m·K	≈ 500 W/m·K, heat cleared faster
Friction coefficient	≈ 0.3	≈ 0.05–0.1, lower cutting force
Chipping risk on brittle boards	Higher at high feed	Lower, stable edge at high feed
Cost per metre of cutting	Higher over long runs	Lower over long runs

Delivery Scope

Blades are produced against the board grade and saw specification; confirm the exact configuration before ordering.

＋Each order also includes an inspection record. Send the board trade name or composition, thickness, surface finish, saw make and model, required diameter, bore, cutting width and tooth count so the configuration is confirmed before production.

Why Choose VPOINT

＋VPOINT supports this saw blade series with:

One-year warranty on every saw blade
Custom diameters, kerfs, bores and tooth counts produced to order
Regrinding service to extend blade life
Factory direct since 2008, ISO 9001 certified
Dual manufacturing bases in Sichuan and Dongguan, China

Precision & Quality Control

＋Every compact laminate saw blade is inspected before shipment: diameter, bore, kerf, plate flatness and tooth geometry are checked against the specification table at micron level. Production follows an ISO 9001 process with batch traceability, so reorders match the original configuration.

Specifications

The table below reproduces the original specification chart. Dimensions are in millimetres; slash-separated figures are listed options, not proof that every combination is available. D is diameter, B cutting width, d bore and Z tooth count.

Diameter D (mm)	Cutting width B (mm)	Bore d (mm)	Teeth Z
250	3.0 / 3.2	25.4 / 30	48 / 60
300	3.2 / 3.5	30	60 / 72
300	4.0	30	72
300	3.2	30	96
350	3.5	30	72
350 / 355	3.5	25.4 / 30	72 / 84
350 / 355	4.0	25.4 / 30	72 / 80
400	4.4	60 / 75	72 / 84 / 96
430	4.4	60 / 75	72 / 84 / 96
450	4.8	60 / 75	72 / 84 / 96

Frequently Asked Questions

Which diameters are available?

＋The chart lists diameters from 250 to 450 mm with cutting widths from 3.0 to 4.8 mm, bores from 25.4 to 75 mm and tooth counts from 48 to 96.

Can it cut calcium-carbonate board?

＋Calcium-carbonate board and phenolic laminated board are listed applications alongside compact laminate. Send the board composition and thickness so suitability is confirmed for the actual grade.

Why PCD instead of carbide on these boards?

＋Compact laminate and similar boards are highly abrasive; the diamond edge holds its sharpness many times longer, keeping chipping low and blade changes rare.

What should I send for a quotation?

＋The board trade name or composition, thickness, surface finish, saw make and model, required diameter, bore, cutting width and tooth count, plus a current blade photo where available.

＋Key words: PCD compact laminate saw blade, diamond HPL cutting blade, calcium carbonate board saw blade, phenolic board saw blade