How hard is the cutting material?

The carbide grade used in this pcd saw blade for trimming machines delivers 1,500–2,000 HV / 7,000–9,000 HV hardness, which keeps the cutting edge sharp under continuous load.

Can you supply OEM or ODM parts, and how fast?

Yes. VPOINT TOOLS runs two factories in China (Chengdu and Dongguan) and accepts OEM and ODM orders. Standard samples and in-stock items ship within 24-48 hours; custom tooling is quoted per specification.

Which machines and materials is this pcd saw blade for trimming machines used for?

It is used on CNC routers, table saws and spindle moulders for cutting particle board, MDF, plywood, solid wood and aluminium composite panels. Chipbreaker or replaceable-insert models are available for high-volume production runs.

Do you ship worldwide?

Yes. VPOINT TOOLS ships carbide and PCD woodworking tooling to more than 100 countries. Tell us the destination and application and we will confirm freight cost and lead time.

PCD Saw Blade for Trimming Machines

This PCD saw blade is listed for trimming operations in woodworking and panel furniture production, where panel edges are trimmed after banding. The material list includes MDF, particleboard, composite panels, solid wood and hardwood.

Product Description

PCD Saw Blade for Trimming Machines for Panel and Wood Processing

Design and Construction

＋Polycrystalline diamond (PCD) teeth are brazed into a steel plate sized for trimming machines, with mounting bores from 25.4 to 50.8 mm. The chart lists diameters from 300 to 455 mm, cutting widths from 3.2 to 5.0 mm and tooth counts from 48 to 70. The series is produced in the Sichuan and Dongguan, China manufacturing bases.

How It Works

＋On the trimming machine the blade trims the banded panel edge flush and square. The PCD edge stays sharp through abrasive edge bands and glue lines, keeping the trimmed face clean and the angle stable between sharpenings.

Applications

Edge trimming in woodworking and panel furniture production
Trimming MDF, particleboard, composite panels, solid wood and hardwood after banding

Suitable Materials

MDF, particleboard, composite panels, solid wood and hardwood, subject to grade and application review
Suitability depends on the specific material grade, machine condition and machining parameters; confirm the application before ordering

Material Comparison: Traditional Carbide-Tipped Saw Blade vs. Diamond (PCD) Saw Blade

＋Typical industry data for reference. Actual results depend on the workpiece grade, machine condition and feed rate.

Property	Traditional Carbide-Tipped Saw Blade	Diamond (PCD) Saw Blade
Cutting material hardness	1,500–2,000 HV	7,000–9,000 HV
Edge life on MDF / particleboard	Baseline (1×)	15–20× longer edge life
Edge life on solid wood	Baseline (1×)	10–13× longer edge life
Edge life on laminate / compact board	Baseline (1×)	10–15× longer edge life
Sharpening cycles	2–4 times	5–8 times
Cut edge quality	Ra 0.4–0.8 µm, more fuzzing	Ra 0.2–0.4 µm, cleaner edge
Thermal conductivity	≈ 100 W/m·K	≈ 500 W/m·K, heat cleared faster
Friction coefficient	≈ 0.3	≈ 0.05–0.1, lower cutting force
Chipping risk on brittle boards	Higher at high feed	Lower, stable edge at high feed
Cost per metre of cutting	Higher over long runs	Lower over long runs

Delivery Scope

Blades are produced against the machine specification; confirm the mounting pattern and exact availability before ordering.

＋Each order also includes an inspection record. Send the trimming machine make and model, material, blade diameter, bore, cutting width, tooth count and a photo or drawing of the existing blade so the configuration is confirmed before production.

Why Choose VPOINT

＋VPOINT supports this saw blade series with:

One-year warranty on every saw blade
Custom diameters, kerfs, bores and tooth counts produced to order
Regrinding service to extend blade life
Factory direct since 2008, ISO 9001 certified
Dual manufacturing bases in Sichuan and Dongguan, China

Precision & Quality Control

＋Every trimming machine saw blade is inspected before shipment: diameter, bore, kerf, plate flatness and tooth geometry are checked against the specification table at micron level. Production follows an ISO 9001 process with batch traceability, so reorders match the original configuration.

Specifications

The table below reproduces the original specification chart. Dimensions are in millimetres. D is diameter, B cutting width, d bore and Z tooth count. Confirm the mounting pattern and exact availability before ordering.

Diameter D (mm)	Cutting width B (mm)	Bore d (mm)	Teeth Z
300	3.2	30 / 25.4	48
355	3.5	50.8	70
355	4.0	50.8	70
355	5.0	50.8	70
405	4.0	50.8	70
405	5.0	50.8	70
455	5.0	50.8	70

Frequently Asked Questions

Which diameters are available?

＋The chart lists diameters of 300, 355, 405 and 455 mm with cutting widths from 3.2 to 5.0 mm, bores of 30/25.4 and 50.8 mm and tooth counts of 48 and 70.

What must be checked before ordering?

＋The bore and guard clearance for the selected row. Send the trimming machine model, workpiece material and thickness, required diameter, bore, cutting width and teeth.