How hard is the cutting material?

The carbide grade used in this tct saw blades delivers 1,500–2,000 HV / 7,000–9,000 HV hardness, which keeps the cutting edge sharp under continuous load.

Can you supply OEM or ODM parts, and how fast?

Yes. VPOINT TOOLS runs two factories in China (Chengdu and Dongguan) and accepts OEM and ODM orders. Standard samples and in-stock items ship within 24-48 hours; custom tooling is quoted per specification.

Which machines and materials is this tct saw blades used for?

It is used on CNC routers, table saws and spindle moulders for cutting particle board, MDF, plywood, solid wood and aluminium composite panels. Chipbreaker or replaceable-insert models are available for high-volume production runs.

Do you ship worldwide?

Yes. VPOINT TOOLS ships carbide and PCD woodworking tooling to more than 100 countries. Tell us the destination and application and we will confirm freight cost and lead time.

TCT Saw Blades

TCT circular saw blades, Ø200-350 mm, 48-96T, bores 25.4/30/60 mm. General-purpose carbide-tipped blades for panel and solid-wood cutting.

The VPOINT TCT Saw Blades are a carbide-tipped circular saw blade. Ideal for general panel sizing, solid wood ripping and crosscutting and table saw and panel saw work.

Product Description

The VP0031 TCT sawblade series carries tungsten carbide tips on a laser-cut, tensioned steel plate, with diameters from 200 to 350 mm. Tooth counts, kerf and bore follow the specifications table for the saw and the panel.

Design and Construction

The VP0031 TCT sawblade series carries tungsten carbide tips on a laser-cut, tensioned steel plate. Diameters run Ø200 to Ø350 mm with plate thicknesses of 2.2 to 4.4 mm, bores of 25.4, 30 and 60 mm, and tooth counts from 48T to 96T matched to each diameter.

How It Works

Carbide-tipped teeth are the standard for general-purpose panel and solid-wood cutting: they cut clean edges in a wide range of materials and can be reground several times. ATB groupings finish laminated faces; flat-group rips clear chips in deep cuts.

Applications

General panel sizing
Solid wood ripping and crosscutting
Table saw and panel saw work
General furniture production

Suitable Materials

Particleboard and MDF
Melamine-faced panels
Solid wood
Plywood and veneered panels

Carbide tips cover a wide material range at economic cost, with several regrinds per set of teeth.

Material Comparison: Tungsten Carbide vs. PCD

This blade uses tungsten carbide tips — the standard choice for general-purpose cutting. The figures below show where carbide and PCD each win, so you can match the tip material to your volume and material.

Property	Tungsten Carbide (This Blade)	PCD Diamond
Hardness	1,500–2,000 HV	7,000–9,000 HV
Tool life on MDF / particleboard / melamine	30–60 h (baseline)	15–20× longer (500–1,200 h)
Tool life on solid hardwood	80–150 h (baseline)	10–13× longer (800–2,000 h)
Tool life on abrasive boards (fibre cement / composites)	baseline	10–15× longer
Edge renewal	4–6 regrinds at shorter intervals	Limited regrinds — the economics come from 15–20× longer intervals between changes
Cut finish	Ra ~0.8 μm typical, degrades as teeth wear	Ra ≤ 0.2 μm achievable, stable over the blade life
Thermal conductivity	~80 W/m·K	540–560 W/m·K — heat leaves the tooth tip fast
Friction coefficient	≈ 0.3	≈ 0.05 — lower cutting forces and heat
Suited for	General-purpose solid-wood work; the economic choice at lower volumes	Abrasive engineered wood, laminates, composites, fibre cement, non-ferrous metals

Figures are typical published values; actual blade life depends on the workpiece material, feed rate, depth of cut, machine condition and maintenance schedule.

Delivery Scope

Single blade. Order by part number with the diameter, kerf, bore and tooth count stated in the specifications table below.

Why Choose VPOINT

One-year warranty on every blade — defects in material or workmanship are covered for 12 months from delivery.
Custom tooling — diameters, kerfs, bores and tooth counts built to your drawing or sample.
Non-standard fabrication — sizes outside the standard catalogue, including bore re-sizing and tooth-count changes.
Resharpening service — blades return to service after regrinding at a fraction of new-blade cost.
Factory-direct since 2008 — ISO 9001 manufacturing in Sichuan and Dongguan, China; 40Cr chrome-molybdenum steel bodies; no trading intermediaries.

Send a drawing, a sample or a worn blade, and our engineering team will quote the exact specification you need.

Precision & Quality Control

Every blade is inspected before shipment. Outside diameter, kerf thickness, plate thickness, bore diameter and tooth count are measured against the values listed in the specifications table, and tooth geometry (hook angle, bevel angle) is verified against the design drawing. Blades are stress-checked for runout and tension before packing.

Blades measuring outside tolerance do not ship. Inspection is performed under our ISO 9001 quality system, with batch records retained for traceability.

Specifications

Part NO.	SIZE尺寸规格
VP003101	Ø200X2.2XØ25.4X48T
VP003102	Ø200X2.2XØ25.4X60T
VP003103	Ø250X2.2XØ25.4X60T
VP003104	Ø300X3.0XØ30X60T
VP003105	Ø300X3.0XØ30X72T
VP003106	Ø300X3.0XØ30X96T
VP003107	Ø350X4.4XØ60X72T
VP003108	Ø350X4.0XØ25.4X84T
VP003109	Ø380X4.8XØ60X72T
VP003110	Ø400X4.4XØ30X72T
VP003111	Ø400X4.4XØ60X84T
VP003112	Ø450X4.8XΦ60X96T
VP003113	Ø120X2.8\3.6XØ22X(12+12)T
VP003114	Ø160X3.1\4.0XØ25.4X36T
VP003115	Ø180X3.3\4.3XØ25.4X36T
VP003116	Ø180X4.3\5.3XØ45X36T

Frequently Asked Questions

What is the TCT Saw Blades used for?

The VP0031 TCT sawblade series carries tungsten carbide tips on a laser-cut, tensioned steel plate.

How do I choose the right size?

Refer to the specification table on this page: part numbers fix the cutting diameter, shank and cutting length. State the diameter, shank and cutting length you need when ordering.

Which materials does it suit?

Typical materials include Particleboard and MDF, Melamine-faced panels, Solid wood. Confirm the material grade and machining conditions for the specific tool before ordering.

Can I order a custom version?

Yes. Send the profile drawing or item code together with the workpiece material, machine model, cutting direction and quantity. Tools are produced to order, and each tool is packed in an individual plastic box.

Key words: TCT saw blade, carbide circular saw blade, panel saw blade, general purpose saw blade